ChinaDrone.Request a quote ↗
COMPONENTZHTAERO

ZHTAERO P15*5

Company: ZHT Technology Co., Ltd. ↗

The ZHTAERO P15*5 is a 15×5-inch carbon fiber propeller supplied as two pieces forming one pair. Its stated characteristics are lightweight construction, high strength, 100% balance and higher load capability. The supplied product is a paired propeller set.

Get a free sourcing quote for ZHTAERO P15*5

ModelZHTAERO P15*5
Propeller size designation15×5 inch
MaterialCarbon fiber
Supplied quantity2 pieces/1 pair
Weight characteristicLightweight
Strength characteristicHigh-strength

Product overview

The ZHTAERO P15*5 is a carbon fiber propeller with a 15×5-inch size designation. Its supplied configuration consists of two propellers forming one pair, making the procurement unit a paired propeller set.

The P15*5 combines lightweight construction with high strength. Its stated characteristics also include 100% balance and higher load capability, complementing the carbon fiber material specification.

Specifications

SpecificationValue & conditions
ModelZHTAERO P15*5
Propeller size designation15×5 inch
MaterialCarbon fiber
Supplied quantity2 pieces/1 pair
Weight characteristicLightweight
Strength characteristicHigh-strength
Balance100% balance
Load capabilityHigher load capability

Ask for the ZHTAERO P15*5 price ↑

More motors, ESCs & propellers from Chinese manufacturers →
HOBBYWING RTF 65A 4in1 6S Lite BLS V2 electronic speed controller board with blue mounting grommets.
Component

HOBBYWING RTF 65A 4in1 6S Lite BLS V2

HOBBYWING

HOBBYWING’s RTF 65A 4in1 6S Lite BLS V2 is a four-channel brushless ESC for FPV aircraft integration. It specifies 65A continuous and up to 80A burst per channel on 4–6S LiPo. The 44 × 44 × 5.86mm component includes input wires, motor solder tabs and a separate capacitor, with configuration dependent on firmware.

View details
CKESC STONE 130A-M electronic speed controller with black finned housing and attached wires
Component

CKESC STONE 130A-M

CKESC

The CKESC STONE 130A-M is a 6~14S brushless UAV electronic speed controller from Nanchang Changkong Technology. Its 155g wired assembly combines PWM control, serial telemetry and motor protection. Integration must accommodate specified cooling for 80A continuous operation, a 130A maximum lasting 3 seconds, and the absence of a BEC.

View details
Happymodel RS1102 brushless motor with exposed copper windings, upright shaft and attached wires
Component

Happymodel RS1102 KV10000 KV13500

Happymodel

The Happymodel RS1102 is a micro FPV drone brushless motor offered in 10000KV and 13500KV versions. It combines a 9N12P configuration with a 13.5mm-diameter, 14mm-long body weighing 2.8g. A 2S battery is recommended, and the 10000KV version is the original Mobula7 O4 motor.

View details
Scorpion HKII-2221-8 motor with orange end caps, shaft and connector leads
Component

Scorpion HKII-2221-8

By Scorpion

The Scorpion HKII-2221-8 is an 81-gram brushless propulsion motor primarily intended for helicopters and ducted fans. It combines a 3595 RPM / Volt winding with a maximum 3s LiPo configuration and includes connectors and mounting hardware. Propeller use requires a separate adapter, and bearings need regular maintenance.

View details
KEEP EXPLORING

Similar products

Browse all products ↗
Skytech S30 propeller blades shown as two folded pairs with mounting hubs
Motors & ESCs

Skytech S30 Propeller Blade

By Skytech

The Skytech S30 Propeller Blade is a foldable propeller made from high-strength carbon. Its design emphasizes easy replacement and minimal maintenance costs, combining a folding physical architecture with a focus on straightforward servicing of the propeller component.

View product →Enquire ↗