The ZHTAERO MN4012 is a UAV propulsion motor intended for both multirotor and fixed-wing aircraft, with a maximum thrust rating of 2.6 kg. The product is a motor component rather than a complete flight platform or an airframe-only kit.
The ZHTAERO MN4012 is a UAV motor intended for multirotor and fixed-wing aircraft. It is a propulsion component rather than a complete flight platform or an airframe-only kit.
The motor has a maximum thrust rating of 2.6 kg.
| Specification | Value & conditions |
|---|---|
| Model | ZHTAERO MN4012 |
| Product type and intended applications | UAV motor for multirotor and fixed-wing aircraft |
| Maximum thrust | 2.6 kg |
The HOBBYWING XRotor 10A is an electronic speed controller for 250 Class Multirotors, rated at 10A continuous and 15A peak with 2-3S LiPo power. International and Asian A/B configurations differ in dimensions, weight and output wiring. It supports throttle signals up to 621Hz, calibration and stick programming, with no BEC output or OneShot support.
The EMAX ECO II 3530 Brushless Motor is an aircraft propulsion component for large FPV, fixed-wing RC, and custom builds using 12-15 inch propellers. Four KV options accommodate specific 5S through 12S configurations. Its installation provisions include an M3 mounting pattern, M6 prop adapter thread, 95 mm leads, and supplied mounting accessories.
The BrotherHobby Returner R7 4008 Motor is a 490KV propulsion motor specified for 6-8S LiPo batteries. Its construction includes a hollow titanium alloy shaft, AI 7075 casing components and a 24N28P configuration. Mechanical integration uses an M6 propeller adapter thread and an M4, 30X30mm mounting pattern.
The CKESC SKY 6S 40A is a lightweight model-aircraft electronic speed controller for 2~6S supplies, rated for 40A continuous operation with good heat dissipation. It includes wiring and multiple propulsion-protection functions, has no BEC, and provides configurable low-voltage protection that is disabled by default.
The Scorpion HKIII-50 Motor Bearing Kit (22mm) provides two different original-equipment replacement bearings for HKIII-5035 Series motors. The bearings fit snugly into the motor housings and require installation pressure through the outer race. Weight including packaging is 16g.
The T-MOTOR VL1165 KV60 is a 24S LiPo UAV propulsion motor with centrifugal cooling, IPX5 protection and a specified maximum thrust of 66 kg. Its integration requirements include a Φ120.5 × 67.9 mm motor envelope and 1710 g cable-inclusive mass. Reference performance covers the motor paired with a VL200A 24S ESC and VZ42 ×16.5-inch propeller.
The KST MS589 is a mini servo from KST Meizhou Company Limited.
The MT40A-OPTO-SF32 is a brushless electronic speed controller listed for multicopters and UAV drones.
The MAD X4229 eVTOL Airplane Drone Motor is a propulsion component offered in 230KV and 420KV options, with maximum thrust of 7.7kg(16.97bl). A possible long-shaft application transfers power from a motor in the middle of the fuselage through an axle to the tail boom for pusher propulsion.
The MAD V135L IPE EVTOL Drone Motor is a 35KV UAV propulsion motor weighing 2245g, designed for 25–30kg payloads per rotor with a 54-inch carbon propeller. Its 24S solution specifies a propeller, ESC and 84–104V battery range, with mounting dimensions and a 25% coaxial thrust-loss allowance guiding integration.