ChinaDrone.Request a quote ↗
COMPONENT

T-MOTOR VL1165 KV60 motor

By T-MOTOR ↗

The T-MOTOR VL1165 KV60 is a 24S LiPo UAV propulsion motor with centrifugal cooling, IPX5 protection and a specified maximum thrust of 66 kg. Its integration requirements include a Φ120.5 × 67.9 mm motor envelope and 1710 g cable-inclusive mass. Reference performance covers the motor paired with a VL200A 24S ESC and VZ42 ×16.5-inch propeller.

Request a quote ↗
T-MOTOR VL1165 KV60 motor with packaging box and mounting hardware.
T-MOTOR VL1165 KV60 motor with packaging box and mounting hardware.
Motor model, speed constant and rated voltageVL1165; 60 RPM/V; 24S LiPo.Rated voltage: 24S LiPo.
Motor dimensions and shaft diametersMotor: Φ120.5 × 67.9 mm. Shaft diameter: IN 15; OUT 12.
Thermal material specificationsMagnet level: 180°C; stator high-temperature-resistant coatings: 150°C; copper wire: 200°C.
Motor lead cable150 mm enameled wire.
Motor configuration36N40P.
Coil insulation test1000 V for 5 s.Test duration: 5 seconds.

Product overview

The T-MOTOR VL1165 KV60 is a UAV propulsion motor with a 36N40P configuration, centrifugal cooling and an IPX5 rating. Its cylindrical envelope measures Φ120.5 × 67.9 mm, and its 1710 g weight includes the cable. The electrical specification pairs a 60 RPM/V speed constant with 24S LiPo operation. Package dimensions are 282 × 172 × 80 mm; no itemized supplied-equipment configuration is established.

The characterized propulsion combination uses the VL200A 24S ESC and VZ42 ×16.5-inch propeller, without establishing that both accompany the motor. The ESC supports PWM/CAN control and electronic propeller locking, with a 108 V maximum. Its 200 A peak rating applies for 10 seconds in an open environment at ≤60°C; 120 A continuous operation depends on heat dissipation. Motor continuous power is specified as 3500 W for 180 seconds. Performance tables are bench-test reference values, with comparison against other motor types discouraged; the 108°C coil reading applies after 10 minutes at 88.8 V and a 30 kg load.

Specifications

SpecificationValue & conditions
Motor model, speed constant and rated voltageVL1165; 60 RPM/V; 24S LiPo.Rated voltage: 24S LiPo.
Motor dimensions and shaft diametersMotor: Φ120.5 × 67.9 mm. Shaft diameter: IN 15; OUT 12.
Thermal material specifications
  • Magnet level: 180°C;
  • stator high-temperature-resistant coatings: 150°C;
  • copper wire: 200°C.
Motor lead cable150 mm enameled wire.
Motor configuration36N40P.
Coil insulation test1000 V for 5 s.Test duration: 5 seconds.
Rotor dynamic balance standard≤20 mg.
BearingImported 6002 bearing.
Ingress rating and cooling architectureIPX5; centrifugal cooling design.
Package dimensions282 × 172 × 80 mm.
Idle current and internal resistanceIdle current: 2.9 A; internal resistance: 18 mΩ.Idle current measured at 25 V; internal resistance at 25°C.
Motor peak current180 A.
Motor continuous power3500 W for 180 s.180-second duration.
Operating temperature range−30 to 55°C.Ambient temperature.
Maximum thrust and motor weightMaximum thrust: 66 kg; motor weight including cable: 1710 g.Motor weight includes cable.
ESC model, control, protocol and voltageVL200A 24S; PWM/CAN control; CAN protocol; maximum voltage 108 V.
ESC peak current200 A.10 seconds in an open environment at temperature ≤60°C.
ESC continuous current120 A.Under certain heat dissipation conditions; these conditions are not further specified.
Propeller lockingElectronic propeller locking.
Encoder cableM6-4 aviation connector; 450 ±10 mm.
ESC standby consumption≤15 mA.Standby.
ESC output cableBlack silicone wire; 8 AWG; 240 ±10 mm.
Throttle position and refresh frequencyThrottle position: 1100–1940 µs, fixed; refresh frequency: 50–500 Hz.Throttle position range is fixed.
ESC input cableRed/black silicone wire; 8 AWG; 1930 ±15 mm.
ESC signal cableBlack shielded cable; OD4.2; 5C; 1980 ±15 mm; JR-3P ×2.
Throttle response speed300 ms.
ESC weight530 g.Excludes cable.
Propeller model, dimensions and weightVZ42 ×16.5 inch; 1066.8 ×419.1 mm; 273 g per blade.Weight is per single blade.
88.8 V reference performance tableReference table. Columns: throttle | thrust (gf) | torque (N·m) | current (A) | RPM | power (W) | efficiency (gf/W). 30% | 10240 | 4.79 | 12.52 | 1837 | 1113 | 9.20 35% | 14007 | 6.49 | 19.03 | 2122 | 1692 | 8.28 40% | 17592 | 8.16 | 26.38 | 2371 | 2345 | 7.50 45% | 21051 | 9.78 | 34.28 | 2600 | 3050 | 6.90 50% | 24984 | 11.59 | 43.74 | 2812 | 3890 | 6.42 55% | 28755 | 13.36 | 54.20 | 3010 | 4821 | 5.96 60% | 32852 | 15.26 | 65.83 | 3202 | 5852 | 5.61 65% | 37212 | 17.27 | 79.10 | 3383 | 7031 | 5.29 70% | 41558 | 19.30 | 93.40 | 3555 | 8302 | 5.01 75% | 45393 | 21.10 | 108.87 | 3692 | 9658 | 4.70 80% | 49844 | 23.27 | 125.54 | 3854 | 11134 | 4.48 85% | 52475 | 24.49 | 135.57 | 3935 | 12021 | 4.37 90% | 56244 | 26.33 | 152.64 | 4067 | 13529 | 4.16 95% | 59951 | 28.13 | 170.67 | 4184 | 15123 | 3.96 100% | 61704 | 29.01 | 180.12 | 4243 | 15964 | 3.87 Coil temperature: 108°C under the stated 10-minute, 30 kg load condition.VL1165 KV60 + VL200A 24S + VZ42 ×16.5 at 88.8 V. Bench-test reference values; comparison with other motor types is not recommended. The 108°C coil temperature refers to 10 minutes at 88.8 V and a 30 kg load, with ambient temperature 25°C.
100 V reference performance table and thermal qualificationReference table. Columns: throttle | thrust (gf) | torque (N·m) | current (A) | RPM | power (W) | efficiency (gf/W). 30% | 13217 | 6.03 | 15.43 | 2050 | 1545 | 8.55 35% | 17831 | 8.13 | 23.38 | 2364 | 2341 | 7.62 40% | 22572 | 10.31 | 32.97 | 2646 | 3303 | 6.83 45% | 27214 | 12.46 | 43.24 | 2899 | 4330 | 6.28 50% | 32017 | 14.67 | 55.27 | 3134 | 5537 | 5.78 55% | 36900 | 16.97 | 68.82 | 3355 | 6892 | 5.35 60% | 40934 | 18.86 | 82.19 | 3512 | 8229 | 4.97 65% | 46332 | 21.46 | 98.73 | 3729 | 9873 | 4.69 70% | 51298 | 23.90 | 117.11 | 3921 | 11707 | 4.38 75% | 56600 | 26.44 | 136.95 | 4084 | 13688 | 4.14 80% | 61191 | 28.70 | 156.93 | 4222 | 15678 | 3.90 85% | 62822 | 29.52 | 162.95 | 4276 | 16277 | 3.86 90% | 65893 | 30.83 | 179.29 | 4352 | 17911 | 3.68 100% | 66032 | 31.08 | 179.91 | 4371 | 17971 | 3.67 Operating temperature: /.VL1165 KV60 + VL200A 24S + VZ42 ×16.5 at 100 V. Bench-test reference values; comparison with other motor types is not recommended. Operating temperature is marked '/' for this test series.
SOURCE WITH CHINADRONE

Request a quote for T-MOTOR VL1165 KV60 motor

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗