ChinaDrone.Request a quote ↗
COMPONENTZHTAERO

MN2212 V2.0

Company: ZHT Technology Co., Ltd. ↗

The ZHTAERO MN2212 V2.0 is a propulsion motor intended for multirotor and fixed-wing UAVs. Its highlighted characteristics are high-strength construction, a “Super Balance” designation and a stated maximum thrust of 1.8kg for the motor.

Get a free sourcing quote for MN2212 V2.0

MN2212 V2.0 motor with black housing, silver end plates and visible copper windings
MN2212 V2.0 motor with black housing, silver end plates and visible copper windings
ModelMN2212 V2.0
Product type and applicationsUAV motor for multirotor and fixed-wing aircraft
ConstructionHigh-strength construction
Balance designationSuper Balance
Maximum thrust1.8kg

Product overview

The ZHTAERO MN2212 V2.0 is a UAV motor for multirotor and fixed-wing aircraft. It serves as a propulsion component within an aircraft power system.

The motor features high-strength construction and a “Super Balance” designation. Its stated maximum thrust is 1.8kg.

Specifications

SpecificationValue & conditions
ModelMN2212 V2.0
Product type and applicationsUAV motor for multirotor and fixed-wing aircraft
ConstructionHigh-strength construction
Balance designationSuper Balance
Maximum thrust1.8kg

Ask for the MN2212 V2.0 price ↑

More motors, ESCs & propellers from Chinese manufacturers →
Scorpion HK-4015 Motor Bearing Kit with two bearings in retail packaging
Component

Scorpion HK-4015 Motor Bearing Kit

By Scorpion

The Scorpion HK-4015 Motor Bearing Kit supplies two original-equipment replacement bearings for HK-4015 Series motors. Each measures 13mm outside diameter by 6mm inside diameter by 5mm thick. The bearings fit snugly into the motor housings and require installation pressure through the outer race.

View details
SIYI CAN LINK tuning module with USB port and green indicator light.
Component

SIYI CAN LINK

SIYI

SIYI CAN LINK is a propulsion upgrade and parameter tuning module for computer-based power-system maintenance. It supports ESC firmware upgrades and parameter adjustments, real-time data monitoring, historical data access and stored fault analysis. The module also supports upgrades to its own firmware.

View details
HOBBYWING V13828 motor with black cylindrical housing and attached cables, shown at an angle.
Component

HOBBYWING V13828

HOBBYWING

HOBBYWING V13828, specified as V13828-55KV, is a heavy-lift propulsion motor for medium and large VTOL aircraft. Procurement assessment should address its mounting envelope, cable routing and recommended propeller, ESC and battery combination. Package contents are not explicitly defined, and published thrust, current and laboratory data retain configuration and measurement qualifications.

View details
MAD Components 29 Inch Carbon Fiber Propeller 1pc, black two-blade propeller with a central mounting hole
Component

29 Inch Carbon Fiber Propeller 1pc

By MAD Components

The MAD 29 Inch Carbon Fiber Propeller 1pc is a single propulsion component with hollow carbon-fiber-and-epoxy blades, a solid drillable hub and a gloss finish. Available pitch selections are 10, 11 and 12. Each propeller is individually inspected and pre-balanced before supply.

View details
CKESC ROCK 280A-HC electronic speed controller with black finned housing and attached cables
Component

CKESC ROCK 280A-HC

CKESC

The CKESC ROCK 280A-HC from Nanchang ChangKong Technology Co., Ltd is a 12–26S brushless UAV electronic speed controller with PWM control and serial telemetry. It supports 140 A continuous operation with specified cooling and 280 A for three seconds. Integration provisions include isolated signal interfaces, optional PWM+CAN communication and no BEC.

View details
KEEP EXPLORING

Similar products

Browse all products ↗
EMAX E3 2812 brushless motor with threaded shaft and attached wires.
Motors & ESCs

EMAX E3 2812 Brushless Motor

By EMAX

The EMAX E3 2812 Brushless Motor is a propulsion component for long-range and high-load FPV aircraft, offered in 920KV and 1150KV versions for 3-6S systems. It combines a steel shaft, anodized AL 7075 housing and one-piece outer rotor, with defined mounting dimensions, wired leads and supplied attachment hardware.

View product →Enquire ↗
T-MOTOR U8 Lite L KV110 UAV motor shown from front and rear with exposed copper windings
Motors & ESCs

U8 Lite L Efficiency Multirotor UAV Motor KV110

By T-MOTOR

The T-MOTOR U8 Lite L Efficiency Multirotor UAV Motor KV110 is an endurance-oriented propulsion component with a 282g weight including cable and maximum thrust of 11.2kg. It combines waterproof and dustproof construction with customized bearings. The supplied package contains one KV110 motor and hardware pack, with T-MOTOR G30*10.5 propeller matching guidance.

View product →Enquire ↗
RadioLink AM32-70A four-in-one electronic speed controller with power leads and yellow connector
Motors & ESCs

RadioLink AM32-70A

RadioLink

The RadioLink AM32-70A is a four-in-one electronic speed controller for UAV propulsion integration. It combines AM32 architecture, a 32-bit MCU and PWM/Dshot control with 2–6S lithium battery input. The 35.3g unit carries a 70A continuous rating and includes a connecting cable and four vibration dampers.

View product →Enquire ↗
Motors & ESCs

T-MOTOR AIR 40A 2-6S NO BEC

By T-MOTOR

The T-MOTOR AIR 40A 2-6S NO BEC is a multi-rotor UAV electronic speed controller supporting 2-6S LiPo batteries and signal frequencies up to 621 Hz. It combines optimized firmware with twisted-pair throttle wiring and is supplied as one ESC with a hardware kit.

View product →Enquire ↗