ChinaDrone.Request a quote ↗
COMPONENTZHTAERO

ZHTAERO G26*8.5

Company: ZHT Technology Co., Ltd. ↗

The ZHTAERO G26*8.5 is a G Series power-system propeller with a stated 26*8.5-inch size designation. It is supplied as two pieces per pair, making the pair the stated configuration for procurement of this propeller component.

Get a free sourcing quote for ZHTAERO G26*8.5

ModelG26*8.5
Product categoryG Series power-system propeller
Size designation26*8.5 inches
Supplied configuration2 pieces per pair

Product overview

The ZHTAERO G26*8.5 is a G Series propeller within the power-system component range. Its stated size designation is 26*8.5 inches, identifying the propeller hardware offered under this model.

The supplied configuration consists of two propeller pieces per pair. Procurement quantities can therefore be expressed in pairs, with each pair accounting for two pieces of the G26*8.5 propeller.

Specifications

SpecificationValue & conditions
ModelG26*8.5
Product categoryG Series power-system propeller
Size designation26*8.5 inches
Supplied configuration2 pieces per pair

Ask for the ZHTAERO G26*8.5 price ↑

More motors, ESCs & propellers from Chinese manufacturers →
HOBBYWING XRotor 10A electronic speed controller with cables and three motor connectors
Component

HOBBYWING XRotor 10A

HOBBYWING

The HOBBYWING XRotor 10A is an electronic speed controller for 250 Class Multirotors, rated at 10A continuous and 15A peak with 2-3S LiPo power. International and Asian A/B configurations differ in dimensions, weight and output wiring. It supports throttle signals up to 621Hz, calibration and stick programming, with no BEC output or OneShot support.

View details
EMAX ECO II 3530 brushless motor with threaded shaft and three connector leads
Component

EMAX ECO II 3530 Brushless Motor

By EMAX

The EMAX ECO II 3530 Brushless Motor is an aircraft propulsion component for large FPV, fixed-wing RC, and custom builds using 12-15 inch propellers. Four KV options accommodate specific 5S through 12S configurations. Its installation provisions include an M3 mounting pattern, M6 prop adapter thread, 95 mm leads, and supplied mounting accessories.

View details
Returner R7 4008 motor in red and black, shown from multiple angles with technical drawings.
Component

BrotherHobby Returner R7 4008 Motor

By BrotherHobby

The BrotherHobby Returner R7 4008 Motor is a 490KV propulsion motor specified for 6-8S LiPo batteries. Its construction includes a hollow titanium alloy shaft, AI 7075 casing components and a 24N28P configuration. Mechanical integration uses an M6 propeller adapter thread and an M4, 30X30mm mounting pattern.

View details
CKESC SKY 6S 40A electronic speed controller with attached wires
Component

CKESC SKY 6S 40A

CKESC

The CKESC SKY 6S 40A is a lightweight model-aircraft electronic speed controller for 2~6S supplies, rated for 40A continuous operation with good heat dissipation. It includes wiring and multiple propulsion-protection functions, has no BEC, and provides configurable low-voltage protection that is disabled by default.

View details
Scorpion HKIII-50 Motor Bearing Kit (22mm) with two bearings in retail packaging
Component

Scorpion HKIII-50 Motor Bearing Kit (22mm)

By Scorpion

The Scorpion HKIII-50 Motor Bearing Kit (22mm) provides two different original-equipment replacement bearings for HKIII-5035 Series motors. The bearings fit snugly into the motor housings and require installation pressure through the outer race. Weight including packaging is 16g.

View details
T-MOTOR VL1165 KV60 motor with packaging box and mounting hardware.
Component

T-MOTOR VL1165 KV60 motor

By T-MOTOR

The T-MOTOR VL1165 KV60 is a 24S LiPo UAV propulsion motor with centrifugal cooling, IPX5 protection and a specified maximum thrust of 66 kg. Its integration requirements include a Φ120.5 × 67.9 mm motor envelope and 1710 g cable-inclusive mass. Reference performance covers the motor paired with a VL200A 24S ESC and VZ42 ×16.5-inch propeller.

View details
KEEP EXPLORING

Similar products

Browse all products ↗
EMAX E3 2808 brushless motor with threaded shaft
Motors & ESCs

E3 2808 Brushless Motor

By EMAX

The EMAX E3 2808 Brushless Motor is a high-torque propulsion component for 6-7 inch long-range, cinematic, exploration and heavy-lift FPV builds. Available in 1300KV and 1500KV versions for 3-6S batteries, it combines an anodized aluminum housing with a one-piece outer rotor and includes mounting hardware.

View product →Enquire ↗
Motors & ESCs

EOLO C18*6.5

By Zhuhai Langyu Electric Technology Co., Ltd.

The SunnySky EOLO C18*6.5 is an integrated carbon fiber composite propeller specified as 18*6.5, weighing 32g individually. It has a maximum working speed of 9000rpm and defined operating and storage conditions. Intended use is restricted to recreational RC modeling, excluding professional, military, commercial and industrial applications.

View product →Enquire ↗
Motors & ESCs

Yahree Aeropower JT2820 KV1050

By Yahree Aeropower Tech Co., Ltd.

The Yahree JT2820 KV1050 is a long-shaft brushless motor for fixed-wing UAVs and aerobatic aircraft. It combines a CNC-machined aluminum housing, 12N14P architecture and triple-bearing support in a 139 +/-5 g package. Recommended integration uses a 3S-4S LiPo battery and 12×6 propeller, with defined continuous, short-duration and magnet-temperature limits.

View product →Enquire ↗