ChinaDrone.Request a quote ↗
COMPONENT

Tatusky anti FPV 900mhz100W

By Tatusky Technology Co., Ltd ↗

The Tatusky anti FPV 900mhz100W is a compact LDMOS RF power amplifier module with LoRa for counter-drone equipment. Identified as item 01497, its named configuration is 900 MHz and 100 W. It generates interference against FPV remote signals and supports frequency-band and power customization.

Get a free sourcing quote for Tatusky anti FPV 900mhz100W

Tatusky anti FPV 900mhz100W RF amplifier module with a silver metal housing and wire leads
Tatusky anti FPV 900mhz100W RF amplifier module with a silver metal housing and wire leads
ManufacturerTatusky Technology Co., Ltd
Product identityTatusky anti FPV 900mhz100W
Item number01497
Frequency designation900 MHz
Power designation100 W
Module technologyLDMOS RF power amplifier module with LoRa

Product overview

The Tatusky anti FPV 900mhz100W is an RF power amplifier module for counter-drone systems, identified as item 01497. Its designation identifies a 900 MHz, 100 W configuration using LDMOS technology with LoRa. Its stated purpose combines signal modulation to counter FPV remote signals with RF power amplification that generates wireless interference against FPV signals.

The hardware has a compact module format suitable for integration into a machine. It serves as a component within counter-FPV equipment. Tatusky supports customization of both the frequency band and power, alongside the named 900 MHz, 100 W configuration.

Specifications

SpecificationValue & conditions
ManufacturerTatusky Technology Co., Ltd
Product identityTatusky anti FPV 900mhz100W
Item number01497
Frequency designation900 MHz
Power designation100 W
Module technologyLDMOS RF power amplifier module with LoRa
PurposeSignal modulation and RF power amplification for interference with FPV remote signals
Physical integrationCompact module suitable for machine integration
CustomizationCustomized frequency band and power supported

Ask for the Tatusky anti FPV 900mhz100W price ↑

More datalinks, video & radio from Chinese manufacturers →
GEPRC GEP-STABLE V2 F4 35A electronics stack with black circuit boards and red mounting spacers
Component

GEP-STABLE V2 F4 35A Flight Controller

By GEPRC

The GEPRC GEP-STABLE V2 F4 35A is a compact UAV electronics stack combining an F4 flight controller, BLheli_32 four-in-one ESC and FPV video transmitter. It uses 20x20mm M2 mounting and supports 2-6s LiPo input at the ESC. Combined and individual component configurations are listed; this is integration hardware rather than a complete aircraft.

Xingkai XK-F367 vehicular MIMO mesh radio with black finned housing and front-panel connectors
Component

Xingkai XK-F367 Datalink

Xingkai

The Xingkai XK-F367 is a vehicular broadband MIMO mesh radio for mobile multimedia networks. Its distributed architecture carries voice, data and video through direct and relay links. A 20watts×2 vehicle configuration and compact OEM format offer distinct integration footprints, with Ethernet, serial and RF connections plus optional network and video extensions.

Walksnail Ascent VRX receiver with two antennas against a coastal landscape
Component

Caddx Walksnail Ascent VRX

Caddx

The CADDX Walksnail Ascent VRX is a compact FPV ground receiver with HDMI display integration and built-in MicroSD recording. It supports 1080P/60FPS and 720P/120FPS decoding, with end-to-end latency as low as 35ms. Its dual-antenna architecture, 7.4–25.2V input and Betaflight/INAV integration suit portable FPV viewing and recording setups.

Team BlackSheep FpvCycle Minimortal T Antenna with black elements, a red center housing, and a connector cable.
Component

TBS Team BlackSheep FpvCycle Minimortal T Antenna

TBS

The Team BlackSheep FpvCycle Minimortal T Antenna is a compact TBS radio-link antenna intended for Toothpick, micro and super Whoop builds. Its short-stem wire construction, published 0.7g weight, 40mm cable and u.FL connector support integration planning, subject to configuration confirmation.

KEEP EXPLORING

Similar products

Browse all products ↗
DolphinRC DP-5.8G antennas with clear caps, black cables and SMA connectors in two lengths
Links & controllers

DolphinRC DP-5.8G antenna

DolphinRC

The DolphinRC DP-5.8G antenna is an FPV antenna for mainstream 5.8GHz analog and digital systems. It combines 5.2–6.0 GHz coverage, an omnidirectional radiation pattern, left-hand circular polarization and flexible printed-circuit construction. The LHCP-SMA configuration uses an SMA male-pin connector, and the package contains one antenna.

DJI RC Pro 2 remote controller with its screen folded flat
Links & controllers

DJI RC Pro 2 Remote Controller

By DJI

DJI RC Pro 2 is a remote controller for supported DJI aircraft, combining flight and camera controls with a folding, rotating 7.02-inch touchscreen. Built-in audio, expandable storage, HDMI output and USB-C support its operational setup. O4/O4+ transmission depends on aircraft pairing, while PD charging supports up to 65 W.