Product overview
The Xingkai XK-F367 connects mobile nodes through a distributed ad hoc network for voice, data, images and video. Its centerless architecture supports point-to-point, multipoint, automatic relay and hybrid arrangements, with same-frequency networking and multiple relay hops. MIMO processing combines spatial multiplexing, space-time coding, diversity and transmit/receive beam forming. Adaptive data rates are 1-100Mbps at 20MHz bandwidth and 180Mbps at the optional 40MHz bandwidth. Single-hop distance is 100-300 KM with a visible path and 1-30 KM in urban areas; average single-hop delay is 10mS at 20MHz bandwidth.
The 20watts×2 vehicle radio occupies 18.3×15.4×6.3cm, weighs 1.56kg and provides four mounting holes. Connections include two TNC RF ports, 1-2 RJ45 Ethernet ports, WiFi AP, serial interfaces, DC input and auxiliary audio/PTT connections. The OEM configuration measures 10.1×5.4×1.9cm, weighs 123.5g and uses an SMP RF connector. Airborne, vehicle rack-mounted and outdoor 20Watts×2 configurations require 18-24VDC, with operating current of 6-7A at 18V. Protection is IP66, with customized IP67/IP68 options; network and video extensions are optional.
Specifications
| Specification | Value & conditions |
|---|---|
| Waveform and MIMO technology | Mobile Network MIMO; spatial multiplexing, space-time coding, diversity, TX/RX beam forming. |
| Receive sensitivity | -103dBm@5MHz BW5MHz bandwidth. |
| Channel bandwidth | 2.5/5/10/20MHz; 40MHz optional.40MHz bandwidth is optional. |
| Data rate | 1-100Mbps(20MHz BW)/180Mbps(40MHz BW); adaptive, QoS.20MHz or 40MHz bandwidth, respectively. |
| Modulation | TD-COFDM; adaptive BPSK/QPSK/16QAM/64QAM/256QAM. |
| RF output power | 20watts×2Airborne, backpack, vehicle rack-mounted or outdoor configuration. |
| Single-hop communication distance | 100-300 KM (visible); 1-30 KM (urban area).Visible path or urban area, respectively. |
| Network modes | Point-to-point, point-to-multipoint, multipoint-to-multipoint; automatic relay; star, line, network and hybrid topologies. |
| Single-hop delay | Average 10mS20MHz bandwidth. |
| Encryption | DES, AES128/256; customized chip/TF card encryption.Chip/TF card encryption is customized. |
| Interference management | Manual spectrum scanning channel selection; optional intelligent frequency channel selection, autonomous frequency hopping and roaming mode.Intelligent frequency channel selection, autonomous frequency hopping and roaming mode are optional. |
| Local and remote management | Operating frequency, channel bandwidth, network ID, transmit power and other parameter settings; spectrum scanning; real-time display and statistical records of network topology, link field strength, signal-to-noise ratio and upload/download traffic; GPS/Beidou electronic map; temperature/voltage/interference monitoring; software upgrade. |
| Startup, network transitions and mobility | Startup less than 30 seconds; network access/update/switchover less than 1 second; no limit on single-system user capacity or Mesh hop count; total multi-hop bandwidth loss less than 30%; automatic carrier tracking; support for mobile communication over 800 km/h. |
| Frequency ranges | MHz: UHF 350-700; L Band 1000-1500; MIIT 336-344/512-582/566-626/606-678/1420-1520/1430-1444; S Band 1800-2500; Lower C Band 4400-5000; Upper C Band 5100-6000. |
| Operating temperature | -40ºC ~+80ºC |
| Protection level | IP66; customized IP67/IP68.IP67/IP68 protection is customized. |
| Vehicle radio dimensions and weight | 18.3×15.4×6.3cm; 1.56kg.20watts×2 vehicle radio. |
| Mounting and colors | 4 mounting holes; black, iron gray or army green optional.Colors are optional. |
| Supply voltage | 18-24VDC20Watts×2 airborne, vehicle rack-mounted or outdoor configuration. |
| Operating and standby current | Operation 6-7A; standby 0.5-0.7A.At 18V; 20Watts×2 airborne, vehicular or outdoor radio. |
| Power connection | Power supply by twist-lock battery or main cable. |
| Basic interfaces | RF 2xTNC; 1-2xRJ45 Ethernet 10/100BaseT; WiFi AP; 1xRS232-485-422-USB-Bluetooth/1.2-230.4Kbps; DC input. |
| Push-to-talk and auxiliary interfaces | MIC, SP, PTT, GND/1xRS485, 1xUSB2.0 OTG. |
| Network extensions | Public network routing/4G LTE, WB-NB integration, fiber and satellite.Optional network extensions. |
| Video extensions | Low-delay HDMI/SDI/CVBS; 4K/2K/1080P/720P/D1.Optional video extensions. |
| Link status indicator |
|
| RSSI link indicator |
|
| Management and control interfaces | Web-based network management/GUI; API secondary development interface/SNMP. |
| OEM dimensions, weight and RF connector | 10.1×5.4×1.9cm; 123.5g; SMP RF connector.OEM configuration. |
| Communication purpose and architecture | XK-F367 mobile broadband multimedia communication system with a distributed, centerless ad hoc architecture for real-time multi-channel voice, data, images and other multimedia.Non-line-of-sight and fast movement. |
