ChinaDrone.Request a quote ↗
COMPONENT

STARTRC VT5 5.8G Dual-Antenna FPV Digital Video Transmission Kit

By Shenzhen STARTRC Technology Co., Ltd. ↗

The STARTRC VT5 is a 5.8G dual-antenna digital FPV video transmission kit from Shenzhen STARTRC Technology Co., Ltd. It combines sky and ground units with a camera, HDMI output and installation accessories. Video is specified at 1080P@60FPS and 16Mbps, with range dependent on operating conditions.

Get a free sourcing quote for STARTRC VT5 5.8G Dual-Antenna FPV Digital Video Transmission Kit

Get a free quote

STARTRC VT5 5.8G dual-antenna FPV digital video transmission kit with camera, ground unit, antennas and mounting accessories
STARTRC VT5 5.8G dual-antenna FPV digital video transmission kit with camera, ground unit, antennas and mounting accessories
ManufacturerShenzhen STARTRC Technology Co., Ltd.
ModelSTARTRC VT5 5.8G Dual-Antenna FPV Digital Video Transmission Kit
Product purposeReal-time digital video transmission during FPV drone flights.
Transmission architecture5.8G dual-antenna system.
Video resolution and frame rate1080P@60FPS.
Video bitrate16Mbps.

Product overview

The STARTRC VT5 from Shenzhen STARTRC Technology Co., Ltd. provides a camera-to-ground digital video link for FPV operation. Its physical arrangement comprises a sky unit, a ground unit and dual antennas, with a camera included in the kit. Video is specified at 1080P@60FPS with a 16Mbps bitrate. The ground unit provides a direct HDMI connection to FPV goggles, while adjustable frequency channels allow channel selection to help avoid interference. A built-in silent fan provides active cooling.

The kit is intended for integration into mini and indoor racing drones, fixed-wing aircraft, RC boats and cars. Drone compatibility covers most FPV drones supporting 5.8G video transmission. Supplied accessories include a storage case, silicone wires and mounting hardware alongside the video equipment. The principal range specification is up to 6km in open environments with high-gain dual antennas; a separate FAQ gives up to 5 kilometers depending on environmental conditions and obstacles, leaving a conflicting range limit.

Specifications

SpecificationValue & conditions
ManufacturerShenzhen STARTRC Technology Co., Ltd.
ModelSTARTRC VT5 5.8G Dual-Antenna FPV Digital Video Transmission Kit
Product purposeReal-time digital video transmission during FPV drone flights.
Transmission architecture5.8G dual-antenna system.
Video resolution and frame rate1080P@60FPS.
Video bitrate16Mbps.
Transmission rangeUp to 6km.Open environments with high-gain dual antennas.
Additional range limitationThe FAQ separately specifies up to 5 kilometers, conflicting with the 6km specification.Depending on environmental conditions and obstacles.
Application platformsMini/indoor racing drones, fixed-wing planes, RC boats, and cars.
Drone compatibilityCompatible with most qualifying FPV drones.FPV drones that support 5.8G video transmission systems.
Video output and connectionHDMI output with plug-and-play connection.Ground unit connected directly to FPV goggles through HDMI.
CoolingBuilt-in silent fan for active cooling.
Frequency channel adjustmentAdjustable frequency channels for interference avoidance.
Included equipmentSky unit, ground unit, dual antennas, camera, storage case, silicone wires, and mounting hardware.Supplied kit configuration.

Ask for the STARTRC VT5 5.8G Dual-Antenna FPV Digital Video Transmission Kit price ↑

Related guides

More datalinks, video & radio from Chinese manufacturers →
GEPRC 868MHz/915MHz 2.4G Tri-Band Stick Antenna with black housing and white lettering
Component

GEPRC 868MHz/915MHz 2.4G Tri-Band Stick Antenna

By GEPRC

The GEPRC 868MHz/915MHz 2.4G Tri-Band Stick Antenna is a single supplied antenna accessory for omnidirectional reception across three frequency bands. It combines a linearly polarized PCB element, an oval ABS housing and an SMA connector in a 172mm, 11.2g assembly, with reception optimized at a vertical angle.

EMAX Nanohawk AIO flight controller board with antenna and power connector lead
Component

EMAX Nanohawk Spare Parts - AIO Flight Controller

By EMAX

The EMAX Nanohawk Spare Parts - AIO Flight Controller is a replacement FrSky BNF electronics assembly combining flight control, ESC and video transmission. It incorporates an F4 controller, MPU6000 gyro, 5A Bl Heli S ESC and 25mW VTX, with 1S input and a choice of soldered or connector motor connections.

CLM920-TD3 wireless module shown from the front and back
Component

JND CLM920-TD3 Cellular Module

By Shenzhen JND Technology Co., Ltd

The JND CLM920-TD3 from Shenzhen JND Technology Co., Ltd is an LCC-packaged wireless terminal module combining cellular communications and GPS positioning. Based on Qualcomm’s MDM9X07 chipset, it supports Cat4, uplink/downlink rates up to 50/150 Mbps, VoLTE, SRLTE, and Windows, Android and Linux operating systems.

PeakFPV Thor T89 FPV video transmitter with red housing, white PEAK lettering and antenna connector
Component

Kimpok PeakFPV Thor T89 Video Transmitter

Kimpok

The PeakFPV Thor T89 is a 34g analog FPV video transmitter with 40 channels across 8.0–8.8GHz and selectable output up to 4W. It supports adjustment through the goggles’ OSD via a transmitter switch and Betaflight power control. Supplied with mounting accessories and a manual, it requires 16-28V DC and management of heat and power consumption.

Xingkai XK-M505E 2*10W mesh radio with black housing, dual antenna connectors and front data port
Component

Xingkai XK-M505E 2*10W Datalink

Xingkai

The Xingkai XK-M505E 2*10W is an airborne MIMO mesh radio for UAV video, data and telemetry links. It combines two 10W RF outputs with distributed networking, Ethernet and serial integration. The compact unit has four mounting holes and supports selectable bandwidths, with optional network and video extensions.

HOBBYWING WiFi Express module with attached cable beside a smartphone displaying the app.
Component

HOBBYWING WiFi Express

HOBBYWING

The HOBBYWING WiFi Express is a compact ESC programming accessory with a hardwired controller cable and smartphone connectivity through the HW LINK APP. It supports parameter adjustment, datalogging and firmware updates. The 11 g module serves selected aircraft, car and boat ESC families, with compatibility limitations within those series.

KEEP EXPLORING

Similar products

Browse all products ↗
Kimpok 5.8G 6dBi black diamond antenna with cable and gold-colored connector
Links & controllers

Kimpok 5.8G 6dBi Antenna

Kimpok

The Kimpok 5.8G 6dBi is a diamond antenna for FPV racing and long-range drone video transmission. It combines RHCP polarization, omnidirectional coverage and 4.5-6dBi gain across specified 5.8G and 5G bands. The fixed 160mm antenna uses an SMA-J connector, with 50Ω impedance and a 50W maximum power rating.

Links & controllers

Kimpok TX1000 Video Transmitter

Kimpok

The Kimpok TX1000 is a compact analog FPV video transmitter for long-range drone applications. It combines 1.2G operation, 1.5W output and eight selectable channels in an 82g module. Integration requires DC12V power, effective cooling and a suitable antenna system; the supplied configuration includes the transmitter, manual and mounting accessories.

Mugin Isolation Module with connected wires, specifications and wiring diagram
Links & controllers

Mugin Isolation Module

Mugin

The Mugin Isolation Module is a compact UAV PWM control signal booster incorporating a high-speed optocoupler isolation IC. Designed to reduce interference and improve signal stability, it boosts signals from as low as 2.8v. It weighs 4.4g, measures 20*10 mm and has a wire specification of 2*10 cm 22AWG.