ChinaDroneRequest a quote →
SkyMEMS IMU188 Miniature 6DoF MEMS IMU with gray metal housing, mounting holes and multicolored wiresSkyMEMS IMU188 Miniature 6DoF MEMS IMU with gray metal housing, mounting holes and multicolored wires

SkyMEMS IMU188 Miniature 6DoF MEMS IMU

The SkyMEMS IMU188 Miniature 6DoF MEMS IMU combines three-axis acceleration and angular-rate sensing for navigation, control and dynamic measurement. Its compact, glue-encapsulated construction includes a pigtail connection, RS422 communication and factory-configurable measurement ranges, with applications including gimbal stabilization and target drones.

SkyMEMSIMU sensors
Applications
Navigation, control and dynamic measurement for defense and commercial applications.

Get a free quote

Product overview

The SkyMEMS IMU188 combines a three-axis accelerometer with three-axis MEMS gyroscopes for six-degree-of-freedom inertial measurement. It supports navigation, control and dynamic measurement in defense and commercial applications, including gimbal stabilization, target drones, armoured personnel carriers and rain-seeding rockets. Its measurement ranges are ±450°/s for the gyroscopes and ±16g for the accelerometer, with factory configuration available for both ranges. Gyroscope bias instability is 1.2 °/h under Allan variance measurement; accelerometer bias instability is typically 50 ug, with minimum and maximum values of 25 and 75 ug.

The compact unit uses glue encapsulation and measures 24.95 × 22.39 × 8.1 mm. It weighs 22 grams with wire and has a pigtail connection. Vibration resistance is 6.06g over 20-2000Hz, while shock resistance is 10000g for a 0.5ms half-sine pulse. The IMU operates from a 5 V supply with power consumption below 0.2 W. Its RS422 differential serial interface provides output rates up to 2000 Hz, with factory-configurable baud and output rates. Before delivery, it receives temperature calibration and compensation, plus compensation for bias, scale factor and cross-axis sensitivity.

Flight control & navigation

Specifications

SkyMEMS IMU188 Miniature 6DoF MEMS IMU specifications
SpecificationValue & conditions
Product and sensor architectureSkyMEMS IMU188 miniature 6DoF MEMS inertial measurement unit combining a 3-axis accelerometer and 3-axis MEMS gyroscopes.
ApplicationsNavigation, control and dynamic measurement for defense and commercial applications.
Application examplesGimbal stabilization, target drones, armoured personnel carriers and rain-seeding rockets.
ConstructionGlue-encapsulated construction; fully calibrated.
Calibration and compensationTemperature calibration and compensation, plus error compensation for bias, scale factor and cross-axis sensitivity.Before delivery.
Dynamic measurement rangesGyroscope: ±450°/s; accelerometer: ±16g.Gyroscope and accelerometer ranges can be configured at the factory.
Gyroscope bias instability1.2 °/hAllan variance.
Gyroscope bias stability5 °/h10s average at a fixed temperature within -40~+85°C.
Gyroscope bias repeatability3 °/h
Gyroscope full-temperature bias0.03 °/sPeak over the full temperature range.
Gyroscope random walk0.2 °/√h
Gyroscope non-linearity100 ppm
Gyroscope axial coupling coefficient1%
Gyroscope linear acceleration effect on bias0.002 °/s/g
Gyroscope bandwidth200 Hz
Accelerometer bias instability25 / 50 / 75 ugAllan variance; minimum / typical / maximum.
Accelerometer initial bias error3 / 4 / 5 mgMinimum / typical / maximum.
Accelerometer resolution0.01 mg
Accelerometer scale factor accuracy0.1 %
Accelerometer non-linearity0.01 %FS
Accelerometer random walk0.01 / 0.015 / 0.02 m/s/√hMinimum / typical / maximum.
Accelerometer bandwidth150 Hz
Communication interfaceRS422 differential serial interface.A suitable converter is required when the host controller does not support RS422.
Serial communication ratesBaud rate: 115200 / 460800 / 921600 bps; output rate: 200 / 1000 / 2000 Hz.Minimum / typical / maximum; baud rate and output rate can be configured at the factory.
Reliability and continuous operationMTBF: 20000h; continuous working time: 120h.
Electrical requirementsSupply voltage: 5 V; power consumption: less than 0.2 W.
Storage temperature-55°C ~ 105°C
Vibration resistance6.06gVibration frequency: 20-2000Hz.
Shock resistance10000gHalf-sine pulse, 0.5ms.
Dimensions, weight and connector
  • Size: 24.95 × 22.39 × 8.1 mm;
  • weight: 22 grams (with wire);
  • connector: pigtail.
Weight includes wire.

Related guides