ChinaDroneRequest a quote →
SkyMEMS ECB200 Compass Sensor Module with a green circuit board and electronic componentsSkyMEMS ECB200 Compass Sensor Module with a green circuit board and electronic components

ECB200 Compass Sensor Module

The SkyMEMS ECB200 Compass Sensor Module is a board-based, three-axis electronic compass for heading and tilt measurement in drones, unmanned systems and other positioning applications. It integrates magnetic sensors and a MEMS accelerometer with hard and soft magnetic compensation, tilt compensation, an LV-TTL interface and user calibration support.

SkyMEMSDrone flight controller
Applications
Laser rangefinders, antenna positioning, buoys, drones and unmanned systems, and robot orientation
Input voltage
3.3±0.3VDC
Weight
Around 6 grams

Get a free quote

Product overview

The SkyMEMS ECB200 combines three-axis magnetic sensors and a three-axis MEMS accelerometer in a compact, solid-state module. It delivers heading, pitch and roll outputs for drones and unmanned systems, robot orientation, laser rangefinders, antenna positioning and buoys. Integrated hard-iron and soft-iron correction algorithms compensate for magnetic distortions within the installed system, while tilt compensation supports inclined operation. Heading coverage is 0~360°, with roll measurement over ±180º and pitch measurement over ±85º.

Measuring 22*18*10mm and weighing around 6 grams, the ECB200 uses a 3.3±0.3VDC supply and an LV-TTL interface with a settable baud rate of 2400~115200. Power consumption is less than 0.15W, startup takes at most 200ms, and the working temperature range is -40~+85°C. Initial installation requires user calibration, with local and command-controlled calibration supported. Magnetic fields affect its sensors: installation calls for at least 20~30cm separation from interference sources, preferably 40cm from motors, followed by a second magnetic calibration.

Flight control & navigationCameras & sensors

Specifications

ECB200 Compass Sensor Module specifications
SpecificationValue & conditions
ProductSkyMEMS ECB200 Compass Sensor Module
ConstructionBoard-based electronic compass sensor combining three-axis magnetic sensors and a three-axis MEMS accelerometer
Angle outputsHeading, pitch and roll
Magnetic and tilt compensationHard and soft magnetic compensation; tilt compensation
Heading range0~360°
Heading accuracy0.3° RMS25°C, tilt angleless than 30°
Heading accuracy0.5° RMS25°C, tilt angleless than 60°
Heading accuracy1.0° RMS25°C, tilt angleless than 85°
Heading resolutionLess than 0.1°
Roll range±180º
Pitch range±85º
Tilt resolutionLess than 0.01°
Input voltage3.3±0.3VDC
Power consumptionLess than 0.15W
Startup timeAt most 200ms
Working temperature-40~+85°C
Communication interfaceLV-TTL
Baud rate2400~115200, settable
Maximum output speed100HzODM supported.
Dimensions (L × W × H)22*18*10mm
WeightAround 6 grams
ApplicationsLaser rangefinders, antenna positioning, buoys, drones and unmanned systems, and robot orientation
User calibrationInitial user calibration required; local calibration supportedFirst installation.
Command-controlled calibrationHost system can initiate calibration through commands
Software optionDLL can be providedWindows 10, 64-bit operating system.
Magnetic interference sensitivitySurrounding magnetic fields affect the magnetometer sensors
Recommended separationAt least 20~30cm from magnetic interference sources; 40cm preferred for motorsInstallation near metal objects, electronics or motors.
Magnetic recalibrationPerform a second magnetic calibration to compensate for magnetic interferenceAfter installation.
Anti-interference casingAvailable with an anti-interference casingOptional casing configuration.

Related guides