ChinaDroneRequest a quote →

SkyMEMS IMU100 Mems Angular Rate Sensor

The SkyMEMS IMU100 MEMS Angular Rate Sensor is a fully calibrated 6 DoF inertial measurement unit for unmanned aircraft, vehicle automation, robotics and stabilization. It combines three-axis angular rate and acceleration sensing with temperature output in a compact, IP67 aluminum housing, delivering data at up to 1000Hz.

SkyMEMSIMU sensors
Applications
Unmanned aircraft, automatic vehicles, ROVs, AGVs, industrial robots, machine control, precision agriculture, platform stabilization and antenna pointing.
Input voltage
5VDC or 9~36VDC.
Weight
Around 70 grams.
Dimensions
50 mm*45 mm*21 mm.

Get a free quote

Product overview

The SkyMEMS IMU100 MEMS Angular Rate Sensor is a fully calibrated, six-degree-of-freedom inertial measurement unit for motion measurement and control. Its seven sensor outputs combine angular rate across three axes, linear acceleration across three axes and temperature, with data output rates up to 1000Hz. Applications include unmanned aircraft, automatic vehicles, ROVs, AGVs and industrial robots, as well as machine control, precision agriculture, platform stabilization and antenna pointing. Default measurement ranges are ±500°/s for the gyroscope and ±10g for the accelerometer, with optional ranges available.

Built with capacitive sensing technology, MEMS components and glue encapsulation, the IMU100 has a compact aluminum housing, a 6 pin mini aviation connector and four locating holes. It measures 50mm × 45mm × 21mm and weighs around 70 grams. IP67 protection and a working temperature range of -40°C to +85°C support operation across demanding environments. Power consumption is below 0.5W with a 5VDC or 9–36VDC input. RS232 is the default interface; RS422, RS485 and RS232 3964(R) are optional.

Flight control & navigationCameras & sensors

Specifications

SkyMEMS IMU100 Mems Angular Rate Sensor specifications
SpecificationValue & conditions
Product type and outputsSkyMEMS IMU100 MEMS Angular Rate Sensor; 6 DoF inertial measurement unit with three-axis angular rate, three-axis acceleration and temperature outputs.
ConstructionCapacitive technology and MEMS components in a compact aluminum housing with a Mil-Standard connector.
Calibration and encapsulationGlue encapsulation and full calibration.
ApplicationsUnmanned aircraft, automatic vehicles, ROVs, AGVs, industrial robots, machine control, precision agriculture, platform stabilization and antenna pointing.
Gyroscope range±500°/s default; ±900°/s optional.Default setting; optional range available.
Gyroscope bias stability5°/h (Allen Variance); 30°/h (1σ).Allen Variance and 1σ measurements, respectively.
Gyroscope bias repeatability50°/h.1σ; tested three times repeatedly.
Gyroscope non-linearity0.05% of FS.
Gyroscope angle random walk0.45°/√hr.Allen Variance.
Gyroscope bias error over full temperature range0.3°/s.-40~85°C.
Gyroscope bandwidth and sampling rateBandwidth: 133Hz; sampling rate: 10000Hz.
Accelerometer range±10g default; ±20g and ±40g optional.X, Y and Z axes; default and optional ranges.
Accelerometer bias stability0.03mg (Allan variance); 0.15mg (1σ, 1s smooth).Allan variance; or 1σ with 1s smoothing, respectively.
Accelerometer bias repeatability0.05mg.1σ; tested three times repeatedly.
Accelerometer non-linearity0.1%FS.
Accelerometer noise density80μg/√Hz.@10g.
Accelerometer bias error over full temperature3mg.-40~+85°C.
Accelerometer bandwidth and sampling rateBandwidth: 1~1000Hz; sampling rate: 3000Hz.
Working temperature-40~+85°C.
Protection levelIP67.
MTBF≥25000hours.
Input voltage5VDC or 9~36VDC.
Power consumptionLess than 0.5W.
Communication interfaceRS232 default; RS422, RS485 and RS232 3964(R) optional.Default and optional interfaces.
Baud rate460800bps default; 115200bps, 230400bps and 921600bps configurable.Default and configurable baud rates.
Data update rate500Hz; selectable 10Hz, 20Hz, 50Hz, 100Hz, 200Hz, 250Hz and 1000Hz; up to 1000Hz.Selectable update rates.
Dimensions50mm*45mm*21mm.
WeightAround 70 grams.
Connector6 pin mini aviation connector.
Mounting holes4 locating holes.

Related guides