Scorpion M-4010 motor shaft kit

The Scorpion M-4010 motor shaft kit supplies 4mm hardened steel replacement shafts for Scorpion M-4010 and MII-4010 multi-copter motors with C-clip retainers. Designed for replacing bent or broken shafts, it uses a press fit in the motor’s aluminum front housing and weighs 12g including packaging.

ScorpionDrone motor

Weight: 12 g

Product overview

The Scorpion M-4010 motor shaft kit supplies 4mm hardened steel replacement shafts for M-4010 and MII-4010 series Scorpion multi-copter motors equipped with a C-clip retainer. Intended to replace shafts bent or broken during a landing, the kit supports motor repair. The shafts can also be shortened with a Dremel tool and cut-off wheel when necessary to fit other motors.

The shafts have a slight press fit in the motor’s aluminum front housing, so removing the setscrews alone will not release them. Removal requires a bearing press or drill press, with the front housing supported in a block of wood to prevent warping. The kit weighs 12g including packaging.

Motors & ESCs

Specifications

Scorpion M-4010 motor shaft kit specifications
Specification	Value & conditions
Product type	Scorpion M-4010 motor shaft kit
Shaft construction	4mm hardened steel shafts
Motor compatibility	Factory replacement shafts for Scorpion M-4010 and MII-4010 series multi-copter motorsFor motors with a C-clip retainer.
Shaft shortening	Can be cut shorter with a Dremel tool and a cut-off wheelWhen shortening is necessary to fit other motors.
Shaft fit	Slight press fitIn the aluminum front housing of Scorpion motors.
Shaft removal	Requires a bearing press or drill press; removing the setscrews alone does not release the shaftsDuring shaft removal, with the motor front housing supported in a block of wood to prevent warping.
Weight	12gIncluding packaging.