MIII-4015 motor shaft kit

The Scorpion MIII-4015 motor shaft kit supplies 4mm hardened steel replacement shafts for MIII-4015 series multicopter motors with a C-clip retainer. Shaft removal requires a bearing press or drill press, with the motor’s front housing supported in a block of wood to prevent warping. Weight including packaging is 12g.

ScorpionDrone motor

Weight: 12 g

Product overview

The Scorpion MIII-4015 motor shaft kit supplies factory replacement shafts for MIII-4015 series Scorpion multicopter motors with a C-clip retainer. Made from 4mm hardened steel, the shafts replace those bent or broken during a landing. They can be shortened with a Dremel tool and a cut-off wheel when necessary to fit other motors. The kit weighs 12g including packaging.

The shafts have a slight press fit in the motor’s aluminum front housing and do not slide out simply by removing the setscrews. Removal requires a bearing press or drill press, with the motor’s front housing supported in a block of wood to prevent warping.

Motors & ESCs

Specifications

MIII-4015 motor shaft kit specifications
Specification	Value & conditions
Product type	Scorpion MIII-4015 motor shaft kit
Shaft diameter and material	4mm hardened steel shafts
Motor compatibility	Factory replacement shafts for Scorpion MIII-4015 series multicopter motors with a C-clip retainer.For MIII-4015 motors with a C-clip retainer.
Shaft shortening	Shafts can be shortened using a Dremel tool and a cut-off wheel.When shortening is necessary to fit other motors.
Shaft fit	Slight press fit into the aluminum front housing.Installed in the aluminum front housing of Scorpion motors.
Shaft removal	Shafts require pressing out with a bearing press or drill press.After the setscrews are removed, with the motor's front housing supported in a block of wood to prevent warping.
Housing support	Support the motor's front housing in a block of wood to prevent warping.During shaft removal.
Weight	12gIncluding packaging.