ChinaDrone.Request a quote ↗
COMPONENT

(4pairs) Rctimer 9.4x4.3 Carbon Fiber Propeller CW CCW

By RCTimer ↗

The Rctimer (4pairs) Rctimer 9.4x4.3 Carbon Fiber Propeller CW CCW is a black carbon fiber propeller set for the DJI Phantom Vision 2 quadcopter. The package includes four clockwise and four counterclockwise propellers, with a stated net weight of 21.76g.

Get a free sourcing quote for (4pairs) Rctimer 9.4x4.3 Carbon Fiber Propeller CW CCW

ManufacturerRctimer
Product designation(4pairs) Rctimer 9.4x4.3 Carbon Fiber Propeller CW CCW
Propeller size designation9.4x4.3"
MaterialCarbon fiber
ColorBlack
Intended applicationDJI Phantom Vision 2 Quadcopter

Product overview

The Rctimer (4pairs) Rctimer 9.4x4.3 Carbon Fiber Propeller CW CCW is a propulsion component set for the DJI Phantom Vision 2 quadcopter. The propellers have a 9.4x4.3-inch size designation and black carbon fiber construction. The product is supplied as propellers, rather than a complete aircraft or airframe kit.

The package contains four clockwise propellers and four counterclockwise propellers, providing eight propellers in four pairs. Both rotation directions are included in the supplied configuration. Net weight is 21.76g, with no allocation specified between an individual propeller and the complete set.

Specifications

SpecificationValue & conditions
ManufacturerRctimer
Product designation(4pairs) Rctimer 9.4x4.3 Carbon Fiber Propeller CW CCW
Propeller size designation9.4x4.3"
MaterialCarbon fiber
ColorBlack
Intended applicationDJI Phantom Vision 2 Quadcopter
Net weight21.76g
Supplied configurationFour clockwise (CW) propellers and four counterclockwise (CCW) propellers; four pairs, eight propellers total.

Ask for the (4pairs) Rctimer 9.4x4.3 Carbon Fiber Propeller CW CCW price ↑

Related guides

More motors, ESCs & propellers from Chinese manufacturers →
EMAX Pro Series 2814 brushless motor with black housing and threaded shaft
Component

EMAX Pro Series 2814 Brushless Motor

By EMAX

The EMAX Pro Series 2814 Brushless Motor is intended for large-propeller FPV platforms, including cinematic rigs and payload-sensitive builds. Its 2814 stator and 730KV or 830KV options support the stated focus on FPV performance tuning, large propellers and smooth cinematic flight.

View details
FLAME 180A 12S V2.0 electronic speed controller with black heat sink and attached wires
Component

ZHTAERO FLAME 180A 12S V2.0 ESC

ZHTAERO

The ZHTAERO FLAME 180A 12S V2.0 is a multirotor UAV electronic speed controller supporting 6-12S LiPo batteries and a 500Hz frequency. Its layered construction incorporates heat dissipation, IP56 ingress protection, and safeguards covering start-up, overload, motor lock-up and throttle signal loss.

View details
CM5330 MOVO 220KV FPV motor with black housing and silver ventilation rings
Component

MAD CM5330 MOVO FPV Motor

By MAD Components

The MAD CM5330 MOVO FPV Motor is an FPV propulsion component available in 220KV and 260KV options. Its D: 63 × 74 mm assembly combines centrifugal heat dissipation, IP45 protection, two motor mounting patterns, and supplied propeller attachment and electrical connection accessories.

View details
HOBBYWING X15 integrated propulsion system with propeller, motor and ESC mounted on an arm tube.
Component

HOBBYWING X15 Propulsion System

HOBBYWING

HOBBYWING X15 is an integrated propulsion assembly for UAVs with heavy-load requirements, identified as “X15 Integrated Drone Propulsion System.” Its procurement specification covers a motor, ESC and propeller configuration, electrical and control interfaces, and qualified thrust and weight figures. Buyers should and accessory inclusion before integration.

View details
Flash Hobby Arthur35A 32BIT ESC circuit board with branded label.
Component

FlashHobby Arthur35A 32BIT ESC

FlashHobby

The FlashHobby Arthur35A 32BIT ESC is a brushless motor controller for multirotor, fixed-wing and helicopter installations. Its 32 × 16 mm, 4.37 g assembly incorporates BLHELI_32bit firmware, programmable protection and multiple control inputs. Electrical ratings are 3–6S and 35 A continuous, with 40 A bursts limited to 10 seconds.

View details
KEEP EXPLORING

Similar products

Browse all products ↗
MAD XP8 Drone Arm Set with propeller, motor, arm tube and green LED light
Motors & ESCs

MAD XP8 Drone Arm Set

By MAD Components

The MAD XP8 Drone Arm Set is a modular agriculture-drone propulsion component with FOC ESC control, IPX6 protection and integrated LED lighting. It offers CW/CCW rotation, optional 30x11 propeller configuration and Serial Port or CAN communication. Maximum thrust is 15kg, with recommended sustained thrust of 5-7KG.

View product →Enquire ↗
20.5 Inch Carbon Fiber Propeller 1pc with two black blades and a central mounting hole
Motors & ESCs

MAD 20.5 Inch Carbon Fiber Propeller 1pc

By MAD Components

The MAD 20.5 Inch Carbon Fiber Propeller 1pc is a single propulsion component with hollow composite blades and a solid, drillable hub for multi-bolt mounting. It combines carbon fiber and epoxy construction with a glossy clear finish. Pitch options are 12W, 13, 14 and 14.5W, and each propeller is individually inspected and pre-balanced.

View product →Enquire ↗