Product overview
The MAD CM5330 MOVO FPV Motor is a propulsion component for FPV aircraft integration, offered in 220KV and 260KV versions. Its motor designation is MAD MOVO CM5330 V1.0. The physical assembly measures D: 63 × 74 mm and incorporates seven pole pairs, a Taiwan / anticorrosive stator, and centrifugal heat dissipation. Mechanical integration uses a shaft specified as IN: 10 mm, with two motor mounting patterns: D:44 M4×4 and D:30 M4×4. Propeller mounting is specified as D:20 M3*4.
Electrical connections use 750 mm black/red silicone cable specified as 14# AWG. The motor has IP45 protection, with separate temperature figures of 180°C for the varnished wire and 150°C for the magnets. Rotor balance is ≤5 mg, while motor balance is ≤10 mg. Supplied equipment comprises prop adapters, propeller plates, bullet connectors, heat-shrink tubes, mounting and propeller screws, an M8 nut, and a sticker. This configuration is a motor with installation accessories, rather than a complete flight platform or airframe kit.
Specifications
| Specification | Value & conditions |
|---|---|
| Motor model | MAD MOVO CM5330 V1.0 |
| KV options | 220KV; 260KV |
| Number of pole pairs | 7 |
| Stator | Taiwan / anticorrosive |
| Varnished wire temperature degree | 180°C |
| Motor dimensions | D: 63 × 74 mm |
| Magnet temperature degree | 150°C |
| Degree of protection | IP45 |
| Cable | 750 mm; 14# AWG; black/red silicone |
| Centrifugal heat dissipation | Yes |
| Rotor balance | ≤5 mg |
| Propeller mounting holes | D:20 M3*4 |
| Motor balance | ≤10 mg |
| Shaft diameter | IN: 10 mm |
| Motor mounting holes | D:44 M4×4; D:30 M4×4 |
| Bearing | 6800*4 |
| Disruptive test voltage | 500 V |
| Supplied accessories | 2 prop adapters; 2 propeller plates; 3 × 4.0 mm bullet connectors; 3 heat-shrink tubes; 4 × M4*12mm motor screws; 4 × M3*8mm prop adapter fixing screws; 2 × M3*18mm propeller screws; 1 M8 nut; 1 stickerIncluded additional accessories. |
Request a quote for CM5330 MOVO FPV Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
