ChinaDrone.Request a quote ↗
COMPONENTZHTAERO

FLAME 180A 12S V2.0

Company: ZHT Technology Co., Ltd. ↗

The ZHTAERO FLAME 180A 12S V2.0 is a multirotor UAV electronic speed controller supporting 6-12S LiPo batteries and a 500Hz frequency. Its layered construction incorporates heat dissipation, IP56 ingress protection, and safeguards covering start-up, overload, motor lock-up and throttle signal loss.

Get a free sourcing quote for FLAME 180A 12S V2.0

FLAME 180A 12S V2.0 electronic speed controller with black heat sink and attached wires
FLAME 180A 12S V2.0 electronic speed controller with black heat sink and attached wires
ModelFLAME 180A 12S V2.0
Product typeElectronic speed controller for multirotor UAVs
Frequency500Hz
Battery compatibility6-12S LiPo
Ingress protection ratingIP56
Physical architectureLayered structure

Product overview

The ZHTAERO FLAME 180A 12S V2.0 is an electronic speed controller for multirotor UAVs. It supports 6-12S LiPo batteries and has a specified frequency of 500Hz. Its intended application is motor speed control within a multirotor aircraft’s power system.

The controller combines a layered physical structure with a design intended to dissipate heat efficiently. It carries an IP56 ingress protection rating. Its protective functions address start-up, overload, motor lock-up and throttle signal loss.

Specifications

SpecificationValue & conditions
ModelFLAME 180A 12S V2.0
Product typeElectronic speed controller for multirotor UAVs
Frequency500Hz
Battery compatibility6-12S LiPo
Ingress protection ratingIP56
Physical architectureLayered structure
Thermal designDesigned for efficient heat dissipation
Start-up protectionStart-up protection
Overload protectionOverload protection
Motor lock-up protectionMotor lock-up protection
Throttle signal loss protectionThrottle signal loss protection

Ask for the FLAME 180A 12S V2.0 price ↑

More motors, ESCs & propellers from Chinese manufacturers →
CM5330 MOVO 220KV FPV motor with black housing and silver ventilation rings
Component

CM5330 MOVO FPV Motor

By MAD Components

The MAD CM5330 MOVO FPV Motor is an FPV propulsion component available in 220KV and 260KV options. Its D: 63 × 74 mm assembly combines centrifugal heat dissipation, IP45 protection, two motor mounting patterns, and supplied propeller attachment and electrical connection accessories.

HOBBYWING X15 integrated propulsion system with propeller, motor and ESC mounted on an arm tube.
Component

HOBBYWING X15

HOBBYWING

HOBBYWING X15 is an integrated propulsion assembly for UAVs with heavy-load requirements, identified as “X15 Integrated Drone Propulsion System.” Its procurement specification covers a motor, ESC and propeller configuration, electrical and control interfaces, and qualified thrust and weight figures. Buyers should and accessory inclusion before integration.

Flash Hobby Arthur35A 32BIT ESC circuit board with branded label.
Component

FlashHobby Arthur35A 32BIT ESC

FlashHobby

The FlashHobby Arthur35A 32BIT ESC is a brushless motor controller for multirotor, fixed-wing and helicopter installations. Its 32 × 16 mm, 4.37 g assembly incorporates BLHELI_32bit firmware, programmable protection and multiple control inputs. Electrical ratings are 3–6S and 35 A continuous, with 40 A bursts limited to 10 seconds.

Maytech MTCG100JF folding propeller set with four black blades and red tip stripes, shown with the paddle clamp option.
Component

Maytech MTCG100JF Folding Propeller

By Maytech

Maytech’s MTCG100JF Folding Propeller is a folding-blade component package for JF P100/V40/V50 agricultural plant-protection drones. The specification table lists MTCG100JF / MTCC100JF, 67.5cm blade length and 10.8cm maximum width. Two composite material options, two blade-package sizes and optional paddle clamps require configuration-specific procurement.

HQProp E-16X10 (2CCW) black two-blade propeller with adaptor rings
Component

HQProp Thin Electric Prop E-16X10 (2CCW)

HQProp

The HQProp Thin Electric Prop E-16X10 (2CCW) is a 16-inch, two-blade propeller with a pitch of 10, made from glass fiber reinforced nylon. It is supplied as a pair of counter-clockwise props. A 6mm shaft bore and adaptor rings from 3mm to 8mm let it fit a range of motor shafts.

KEEP EXPLORING

Similar products

Browse all products ↗
EMAX Nano Series ESC 12A V2 active braking 3S-4S electronic speed controller with attached wires
Motors & ESCs

EMAX Nano Series ESC 12A V2-active braking 3S-4S

By EMAX

The EMAX Nano Series ESC 12A V2-active braking 3S-4S is a compact power-control component for racing multicopters. It combines a 12A rating and 3S-4S input with BLHeli-based firmware, OneShot125 support and damped-light active braking. Its opto design uses twisted-pair throttle signal wiring and supports several named flight controllers.

HOBBYWING RTF 65A 4in1 6S Lite AT electronic speed controller board with blue mounting grommets.
Motors & ESCs

HOBBYWING RTF 65A 4in1 6S Lite AT

HOBBYWING

HOBBYWING’s RTF 65A 4in1 6S Lite AT is a four-channel brushless ESC for FPV drone integration. It combines solder-tab motor connections, a compact board and configurable digital control. Published ratings specify 65A continuous and 80A peak per channel with 4–6S LiPo input.