The RCTimer Φ3.17x45mm Slowly Speed Motor Shaft is a motor component measuring 3.17 mm in diameter and 45 mm in length. Its supplied configuration consists of one piece, providing a single shaft per stated quantity.
Get a free sourcing quote for Φ3.17x45mm Slowly Speed Motor Shaft
The RCTimer Φ3.17x45mm Slowly Speed Motor Shaft is a motor shaft with a diameter of 3.17 mm and a length of 45 mm. These dimensions define the component’s physical size for procurement.
The supplied configuration is one motor shaft. The single-piece quantity applies to the shaft itself.
| Specification | Value & conditions |
|---|---|
| Product | RCTimer Φ3.17x45mm Slowly Speed Motor Shaft |
| Shaft diameter | 3.17 mm |
| Shaft length | 45 mm |
| Supplied quantity | 1 piece |
The BrotherHobby 4-8S 32Bit 2IN1 80A ESC XT V1 is a two-channel electronic speed controller rated at 80A*2 continuous current. It combines PWM and DSHOT control with current metering and telemetry feedback in a 55g unit, with specified external capacitors, motor and power plugs, and a 62.8mmx78mmx21mm overall envelope.
The GEPRC GEP-12A-F4 Flight Controller 12A ESC is a compact flight-control and motor-control electronics assembly for micro indoor quadcopters. It combines an STM32F411 processor, BMI270/42688 inertial sensing and BetaFlight OSD with a BLheli_S ESC. The 5.6g board accepts 2–4S LiPo input and comes with a power cable and mounting hardware.
The VL8022 KV170 is a motor for VTOL drones.
The Scorpion HK5-4015-805kv is a 257.8-gram BLDC motor intended primarily as a lower-power option for the SAB RAW 500 helicopter. It combines internal and external fan cooling with 1330-watt continuous power. The specified LiPo maximum is 6s, with higher cell counts possible through appropriate gear ratio adjustment. Connectors, heat shrink and hardware are included.
An electronic speed controller designed for industrial drones.
The ZHT Technology Co., Ltd. ALPHA 120A 12S is a field-oriented-control electronic speed controller for multirotor UAVs. It features low noise, low temperature, low interference, fast response and high efficiency. The manufacturer requests the intended motor type for compatibility.
The RCTimer BC2212 is an outrunner brushless propulsion motor available in 930KV, 1000KV, 1400KV and 2200KV configurations. All weigh 50g and share motor and shaft dimensions. Maximum power ranges from 130W to 342W, with configuration-specific propeller specifications, 2–3-cell Li-Po battery specifications and 30A ESC ratings.
The RTF 5315-360KV-BLACK-V1 is a 360KV rotor motor for 8S LiPo propulsion, with 1200W rated output and specified ESC and propeller combinations.
The HOBBYWING Platinum 50A V3 is a brushless electronic speed controller for fixed-wing and helicopter models. It supports 2-6S LiPo batteries, provides 50A continuous and 75A peak current, and integrates a BEC with software-selectable voltage. Its wiring includes motor connectors.
The GEPRC TAKER F405 BLS 50A Stack is a UAV electronics assembly pairing an F405 flight controller with a four-in-one 50A ESC. Designed for direct DJI Air Unit connection, it includes dual independent BEC outputs, onboard logging and mounting accessories. Both boards support 3-6S LiPo input, with different board footprints sharing a 30.5×30.5mm mounting pattern.