Product overview
The iFlight BLITZ F7 V1.2 Flight Controller combines an STM32 F722 MCU with an ICM42688 gyro, DPS310 barometer and AT7456E OSD chip. Its circuit design incorporates improved components, an LC filter and lower electrical noise, while onboard indicator LEDs support visual debugging. The board provides 32MB of Blackbox flash, six UARTs and four motor outputs through an SH1.0 connector. It is intended for recreational use only and does not support autonomous flight.
A plug-and-play DJI HD VTX connector requires no soldering, and Smartaudio / IRC Tramp VTX protocols are supported. Suggested wiring assigns UART 1 to HD or analog VTX, UART 2 to a receiver, UARTs 3/4/5 to GPS or other serial sensors, and UART 6 to ESC telemetry. The 36.5*35 mm board weighs 7.8g and uses a 30.5*30.5mm mounting pattern with 4mm PCB holes. The package includes one flight controller, FC connectors and silicon grommets.
