ChinaDroneRequest a quote →
DroneCAN M9N GPS module with round black housing, attached cable and connectorDroneCAN M9N GPS module with round black housing, attached cable and connector

DroneCAN M9N GPS Flight Controller

The Gesai DroneCAN M9N GPS Flight Controller is a GNSS receiver module for drones and UAVs used in mapping, surveying, precision agriculture and autonomous navigation. Built around the Ublox NEO M9N receiver, it supports up to four concurrent GNSS constellations, DroneCAN communication at 1 Mbit/s, and PX4 and Ardupilot firmware.

GesaiDrone flight controller
Applications
Mapping, surveying, precision agriculture and autonomous navigation
Weight
36 g
Size
Diameter: 54 mm; Thickness: 14.5 mm
Voltage
4.7-5.2 V

Get a free quote

Product overview

The Gesai DroneCAN M9N GPS Flight Controller provides GNSS reception for drone and UAV applications including mapping, surveying, precision agriculture and autonomous navigation. Its Ublox NEO M9N receiver supports up to four concurrent GNSS constellations: GPS, Galileo, GLONASS and BeiDou. Navigation updates run at 5Hz by default, with a 10Hz maximum. Position accuracy is 2.5m, while speed accuracy is 0.05 m/s. With Real-Time Kinematic correction services, the module delivers centimeter-level positioning accuracy. Integration connects the module to the drone’s flight controller and includes configuring satellite signal reception.

The hardware combines an STM32G4 processor running at 170MHz with 512K FLASH, a BMM150 or IST8310 compass, and a 25 x 25 x 4 mm ceramic patch antenna. An LNA MAX2659ELT+ RF amplifier and low noise 3.3V regulator are also incorporated. DroneCAN communication operates at 1 Mbit/s through a GHR-04V-S port, with PX4 and Ardupilot firmware support. The unit measures 54mm in diameter and 14.5mm thick, weighs 36g and has a 26cm cable. It operates at 4.7–5.2V and -40 to 80°C, drawing less than 200mA at 5V.

Flight control & navigation

Specifications

DroneCAN M9N GPS Flight Controller specifications
SpecificationValue & conditions
ProductGS DroneCAN M9N GPS Flight Controller
ApplicationsMapping, surveying, precision agriculture and autonomous navigation
GNSS ReceiverUblox NEO M9N
Number of Concurrent GNSSUp to 4 GNSS (GPS, Galileo, GLONASS, BeiDou)
ProcessorSTM32G4 (170MHz, 512K FLASH)
CompassBMM150 or IST8310
Frequency Band
  • GPS: L1C/A;
  • GLONASS: L10F;
  • Beidou: B1I;
  • Galileo: E1B/C
GNSS Augmentation SystemSBAS: WAAS, EGNOS, MSAS, QZSS
Navigation Update5Hz default (10Hz MAX)
Accuracy2.5m
Accuracy with RTK CorrectionsCentimeter-level accuracyWith Real-Time Kinematic (RTK) correction services.
Speed Accuracy0.05 m/s
Max # of Satellites22+
Communication ProtocolDroneCAN @ 1 Mbit/s
Supported Autopilot FirmwarePX4, Ardupilot
Port TypeGHR-04V-S
Antenna25 x 25 x 4 mm ceramic patch antenna
Power ConsumptionLess than 200mA @ 5VAt 5V.
Voltage4.7-5.2V
Operating Temperature-40~80°C
SizeDiameter: 54mm; Thickness: 14.5mm
Weight36g
Cable Length26cm
RF AmplifierLNA MAX2659ELT+ RF Amplifier
RegulatorLow noise 3.3V regulator
IntegrationConnects to the drone's flight controller, with satellite signal reception configuration and optional RTK corrections

Related guides