Product overview
The BrotherHobby VY 2004 Ultralight Motor is a CW-designated propulsion component intended for sub-250g racing drones with 5-inch propellers. It is offered in four KV options with defined battery and propeller pairings: 1700KV and 1950KV for 6S operation, and 2100KV and 3150KV for 4S operation, each using a 5-inch propeller. Selection therefore depends on the intended battery configuration. The product is an individual motor for integration into a drone, rather than a flight platform or airframe-only kit.
The motor combines a 12N14P configuration, N52H magnets and a 0.15mm Nippon silicon-steel stator. Both the base casing and bell cap use Al 7075, while the Japanese NMB bearings measure 7 × 3 × 3mm. Integration provisions include an M2 bolt pattern on 12 × 12mm spacing and 24AWG wire specified at 16cm. The copper wire uses material specified as 260 °C military grade. Motor weight is 14.9g with short wire, a qualification relevant to the intended sub-250g aircraft mass budget.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer | BrotherHobby |
| Model | VY 2004 Ultralight Motor |
| Rotation designation | CW |
| Intended application | Motor for a sub-250g 5-inch racing droneSub-250g racing drone with 5-inch propellers. |
| KV options | 1700KV, 1950KV, 2100KV, 3150KV1950KV and 1700KV: 6S with 5-inch propeller; 2100KV and 3150KV: 4S with 5-inch propeller. |
| Motor configuration | 12N14P |
| Wire gauge and length | 24AWG, 16cm |
| Magnet | N52H |
| Copper wire material | 260 °C military-grade material |
| Cell count | 4/6SLiPo battery. |
| Base casing | Al 7075 |
| Bell cap | Al 7075 |
| Bearings | Japanese NMB, 7 × 3 × 3mm |
| Stator | 0.15mm Nippon silicon steel |
| Bolt pattern | M2, 12 × 12mm |
| Weight | 14.9gWith short wire. |
