Scorpion HKII-4530-540kv 6mm 55mm
By ScorpionThe Scorpion HKII-4530-540kv 6mm 55mm is a helicopter motor rated at 540KV RPM/Volt with a maximum 12s LiPo configuration. It weighs 588 Grams (20.74 oz) and has a 56.9 mm outside diameter. Maximum continuous ratings are 115 Amps and 4800 Watts; peak ratings of 250A and 11000 Watts apply for 2 seconds.
Explore product ↗industryScorpion HKII-7050-330KV
By ScorpionThe Scorpion HKII-7050-330KV is a brushless motor for applications including large UAVs, offering 10000 Watts maximum continuous power at up to 200 Amps. Its aluminum alloy construction, defined shaft dimensions and 50V maximum voltage guide integration. Commercial use requires application-specific power and ESC selection, while bearings require regular maintenance.
Explore product ↗industryHKIII-4020 Shaft Kit (5mm 31mm)
By ScorpionThe Scorpion HKIII-4020 Shaft Kit (5mm 31mm) is a replacement motor shaft kit for specified Scorpion helicopter motors. It includes a shaft, washer and two C-clips. The described shaft measures 8mm in diameter and 78.7mm long, with a 5mm output end; removal from Scorpion motors requires a press.
Explore product ↗industryHKIII-4025 Shaft (6mm 20mm)
By ScorpionThe Scorpion HKIII-4025 Shaft (6mm 20mm) is a replacement motor shaft kit custom made for Henseleit TDF use. It combines an 8mm shaft diameter, a 6mm pinion end and a 20mm output length. Installation involves a press-fit interface, and packaged weight is 45g.
Explore product ↗industryHKIII-4025 Shaft Kit (6mm)
By ScorpionThe Scorpion HKIII-4025 Shaft Kit (6mm) supplies a replacement shaft, washer and two C-clips for compatible Scorpion helicopter motors. Its 8mm shaft measures 83.7mm long and has a 6mm output end for matching pinions. The motor housing’s press fit requires supported press removal during servicing.
Explore product ↗industryHKIII-4025 shaft kit 5mm
By ScorpionThe Scorpion HKIII-4025 shaft kit 5mm is a factory replacement shaft component for HK-4025 and HKIII-4025 helicopter motors. Its 8mm body measures 84.9mm long, with a reduced 5mm pinion end. Integration requires attention to shaft dimensions and press-fit removal procedures.
Explore product ↗industryHKIII-4035 Shaft (6mm 20mm)
By ScorpionThe Scorpion HKIII-4035 Shaft (6mm 20mm) is a replacement motor shaft kit custom made for Henseleit TDF use. Its hardened steel shaft combines an 8mm body, a 6mm pinion interface and a 20mm output shaft length. Installation work must account for the motor housing’s press fit.
Explore product ↗industryHKIII-4035 Shaft Kit (6mm 37mm)
By ScorpionThe Scorpion HKIII-4035 Shaft Kit (6mm 37mm) is a replacement helicopter motor shaft kit with retaining hardware. Its 100mm-long shaft has an 8mm body and a 6mm pinion end. Intended applications include specified Scorpion motors used in the T-700E helicopter, with press equipment required for shaft removal.
Explore product ↗industryScorpion HKIII-50 Motor Bearing Kit (22mm)
By ScorpionThe Scorpion HKIII-50 Motor Bearing Kit (22mm) provides two different original-equipment replacement bearings for HKIII-5035 Series motors. The bearings fit snugly into the motor housings and require installation pressure through the outer race. Weight including packaging is 16g.
Explore product ↗industryHKIII-5020 shaft kit (6mm 44mm)
By ScorpionThe Scorpion HKIII-5020 shaft kit (6mm 44mm) is a helicopter motor shaft accessory in the HKIII-50 Series range. Supplied as a component kit, it has a stated weight of 54g including packaging and carries the product description designation FSR-E.
Explore product ↗industryScorpion HKIII-5020-450KV
By ScorpionThe Scorpion HKIII-5020-450KV is an electric motor component with a 12-arm stator, 10 magnet poles and 14-turn delta winding. It weighs 501 grams and supports a maximum 12s LiPo configuration. Continuous ratings are 85 amps and 3770 watts, with higher peak ratings restricted to five seconds.
Explore product ↗industryScorpion HKIII-5020-520KV
By ScorpionThe Scorpion HKIII-5020-520KV is an electric drive motor with a 12-arm stator, 10 magnet poles and a 13 Turn Delta winding. It weighs 498 Grams and supports a maximum 12s LiPo configuration. Continuous limits are 90 Amps and 4000 Watts, with higher peak ratings restricted to 5 seconds.
Explore product ↗