RadioLink RE15A 2S
By RadioLinkThe RadioLink RE15A 2S is a fixed-wing brushless electronic speed controller with PWM and Dshot300 support, an integrated 5V BEC and adjustable motor timing. Its microcontroller-based design includes filtering, synchronous freewheeling and protective power control. The package contains one ESC and a packaging bag.
Explore product ↗industryRadiolink RTK F9P
By RadioLinkThe Radiolink RTK F9P is an RTK positioning receiver for integration into drone and vehicle systems, supporting rover or base station operation. It combines a Ublox F9P module, geomagnetic sensing and USB, UART and I2C interfaces. Supply configurations include a standalone receiver package and kits with base station or rover antennas.
Explore product ↗industryRadioLink SE100
By RadioLinkThe RadioLink SE100 is an M10N GPS positioning module with an integrated IST8310 compass for flight-controller integration. It combines a Ublox M10050 decoder, ceramic antennas and two-stage interference filtering, with specified 50-centimeter positioning accuracy. The package includes the module and a GPS holder.
Explore product ↗industrySE100(M10N)
By RadioLinkThe RadioLink SE100(M10N) is a flight controller GPS module combining a Ublox M10050 receiver, ceramic antenna and IST8310 compass. It supports simultaneous reception from four satellite systems, specifies 50 cm positioning accuracy, and incorporates two-stage interference filtering. The package includes the module and a mounting bracket.
Explore product ↗industrySU04
By RadioLinkThe RadioLink SU04 is a compact ultrasonic sensor accessory for flight-controller-based obstacle avoidance and altitude holding. Its single-detector transceiver weighs 8g and measures 20 × 22 × 19 mm. It supports I2C and UART with MAVLink, and includes connection wires for Mini Pix and PIXHAWK.
Explore product ↗industrySU27
By RadioLinkThe RadioLink SU27 is a brushless fixed-wing sport aircraft with a reinforced polypropylene airframe and Byme-DB stabilization. RTF packages include a T8FB or T8S radio, battery and charger. Three flight modes cover assisted leveling through manual control. Flight time is 9 minutes with the described Gensace 2S (7.4V) 600mAh 25C LiPo; supplied RTF batteries are listed as 15C.
Explore product ↗industrySUI04
By RadioLinkThe RadioLink SUI04 is an 8g ultrasonic sensor accessory for multirotors, combining a single-detector transceiver, 32-bit processing and hardware/software filtering. Its compact package includes one sensor and two connection wires. Overall obstacle avoidance requires compatible flight-controller integration and Copter V3.5.7 firmware.
Explore product ↗industryRadioLink T12D
By RadioLinkThe RadioLink T12D is a 12-channel radio-control transmitter supplied with an R12F receiver for aircraft and other model applications. It combines programmable mixing, a graphical display, external long-range module support and wired or wireless trainer modes. Simulator use and fishing-point functions require specific firmware or equipment.
Explore product ↗industryRadioLink T16D
By RadioLinkThe RadioLink T16D is a handheld 16-channel radio-control system supplied with an R16F receiver. It combines programmable mixing, model storage, customizable voice announcements and telemetry with a JR bay for supported external RF modules. Battery fit, the 3S supply ceiling with an external module, and minimum firmware versions for wireless simulation are key integration considerations.
Explore product ↗industryRadioLink T8FB(BT)
By RadioLinkThe RadioLink T8FB(BT) is an eight-channel radio transmitter for aircraft and surface models, with dual-stick controls, Bluetooth setup and USB configuration. Its standard R8EF supports SBUS, PPM and PWM. Battery options include an 18650 lithium battery, which must have a JST connector and fit the 115 × 35.5 × 24mm battery compartment.
Explore product ↗industryRadiolink T8S
By RadioLinkThe Radiolink T8S is an eight-channel handheld transmitter for aircraft and surface models, combining removable joysticks, programmable mixing, Bluetooth setup and receiver telemetry. Its standard R8EF supports SBUS, PPM and PWM integration. A built-in lithium battery charges by USB. Listed transmitter-and-receiver package contents depend on the purchased configuration.
Explore product ↗industryT8S(OTG)
By RadioLinkThe RadioLink T8S(OTG) is an eight-channel handheld radio-control set for aircraft, surface models and robots. It combines programmable controls with a compact R8SM receiver, wired Android parameter setup and USB charging. Its built-in 1S 900mAh lithium battery provides five hours of operation when fully charged.
Explore product ↗