Product overview
The Radiolink RTK F9P is a positioning receiver for drone and vehicle control integration, supporting rover and base station roles. Its electronics combine a Ublox F9P module with an isenTEK IST8310 geomagnetic sensor and a PCB antenna feeder running from the SMA connection to the module’s RF input. A 3PEAK TPL910A regulator provides output voltage ripple as low as 4.5uVrms, while the PCB routing separates digital and analog circuits. TVS and ESD components protect the antenna end, with ESD protection also fitted to the data interface.
Integration connections comprise one USB port, two UART ports and an I2C interface sharing the UART1 port; Type-C provides an upgrade connection. Updates reach up to 20Hz, convergence takes less than 10 seconds, and RTK mode switching occurs within 10 seconds. The standalone package supplies one receiver and a packing bag, with antenna-equipped base station, rover and combined kits offered separately. Used with ANT-B10 and ANT-M7 antennas and PIX flight controls, the RTK kit supports agriculture, mapping, inspection and delivery applications, with high-precision positioning confined to the mobile station’s communication range.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | Radiolink RTK F9P RTK receiver |
| Positioning module | Ublox F9P |
| Antenna feeder | PCB antenna feeder from the SMA antenna connection to the RTK module RF input, with almost zero loss |
| Voltage regulator | 3PEAK TPL910A low-ripple, fast-response LDO |
| Output voltage ripple | As low as 4.5uVrms |
| PCB circuit layout | PCB routing isolates digital and analog circuits |
| Geomagnetic sensor | Built-in isenTEK IST8310 geomagnetic chip |
| Interfaces | 1 USB port, 2 UART ports and 1 I2C interfaceI2C shares the UART1 port. |
| Upgrade connection | Type-C connection for upgrades |
| Indicators | Power and RTK LEDs |
| Dimensional annotations | 49mm (1.93"), 49mm (1.93") and 31.6mm (1.24") |
| Antenna protection | TVS and ESD protection at the antenna end |
| Data interface protection | ESD protection on the data interface |
| Operating roles | Rover or base station |
| Update rate | Up to 20Hz |
| Convergence time | Less than 10 seconds |
| RTK mode switching | Within 10 seconds |
| System integration | Integration with Radiolink agricultural machinery automatic driving systems supporting 90-degree on-the-spot steering, or the M435 Heavy Lift DroneRTK F9P receiver with ANT-B10 base station antenna, ANT-M7 rover antenna and PIX flight control series. |
| Positioning applications | High-precision positioning for agriculture, surveying and mapping, inspection, express delivery, takeout delivery and rescue material deliveryRTK F9P receiver with ANT-B10 base station antenna, ANT-M7 rover antenna and PIX flight control series; within the communication range of the mobile station. |
| Standard supplied configuration | 1 RTK F9P receiver and 1 packing bagStandalone receiver package. |
| Base station kit contents | 1 RTK F9P receiver, 1 ANT-B10 base station antenna and 1 ANT-B10 connection cableRecommended RTK Base Station Kit. |
| Rover kit contents | 1 RTK F9P receiver, 1 ANT-M7 rover antenna and 1 ANT-M7 connection cableRecommended RTK Rover Kit. |
| Combined base station and rover kit contents | 2 RTK F9P receivers, 1 ANT-B10 base station antenna, 1 ANT-B10 connection cable, 1 ANT-M7 rover antenna, 1 ANT-M7 connection cable and 1 Type-C cable for upgrades and parameter settingRecommended RTK Basestation and RTK Rover Kit. |
Request a quote for Radiolink RTK F9P
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
