ChinaDrone.Request a quote ↗
COMPONENTZHTAERO

ZHTAERO P16*5.4

Company: ZHT Technology Co., Ltd. ↗

The ZHTAERO P16*5.4 is a carbon fiber propeller supplied as two pieces forming one pair. Its stated size is P16×5.4 inches, and its product positioning emphasizes longer flight time, balance and higher load capability.

Get a free sourcing quote for ZHTAERO P16*5.4

ModelZHTAERO P16*5.4
Propeller sizeP16×5.4 inch
MaterialCarbon fiber
Supplied configuration2 pieces / 1 pair
Flight-time claimLonger flight time
Balance claim100% balance

Product overview

The ZHTAERO P16*5.4 is a carbon fiber propeller offered in a two-piece configuration forming one pair. Its stated size is P16×5.4 inches. The supplied hardware is a propeller pair, making the component itself the procurement item rather than a complete flight platform or an airframe kit.

The P16*5.4 is positioned around longer flight time, 100% balance and higher load capability. These are qualitative benefits apart from the stated balance percentage; they do not provide a numerical flight-duration increase or payload rating. The concrete purchasing specifications are the model, propeller size, carbon fiber construction and two-piece pair configuration.

Specifications

SpecificationValue & conditions
ModelZHTAERO P16*5.4
Propeller sizeP16×5.4 inch
MaterialCarbon fiber
Supplied configuration2 pieces / 1 pair
Flight-time claimLonger flight time
Balance claim100% balance
Load-capability claimHigher load capability

Ask for the ZHTAERO P16*5.4 price ↑

More motors, ESCs & propellers from Chinese manufacturers →
T-MOTOR U8 Lite L KV110 UAV motor shown from front and rear with exposed copper windings
Component

U8 Lite L Efficiency Multirotor UAV Motor KV110

By T-MOTOR

The T-MOTOR U8 Lite L Efficiency Multirotor UAV Motor KV110 is an endurance-oriented propulsion component with a 282g weight including cable and maximum thrust of 11.2kg. It combines waterproof and dustproof construction with customized bearings. The supplied package contains one KV110 motor and hardware pack, with T-MOTOR G30*10.5 propeller matching guidance.

Scorpion HKII-2208-28 motor with orange end caps, shaft and three connector leads
Component

Scorpion HKII-2208-28

By Scorpion

The Scorpion HKII-2208-28 is a 39-gram brushless motor for helicopter and ducted fan applications, with a 3125 RPM / Volt rating and maximum 3s LiPo specification. Supplied with connectors, heat shrink and mounting screws, it requires a separate adapter for propeller use and regular bearing maintenance.

BrotherHobby Avenger 2510 Motor shown from multiple angles with specifications and technical drawings
Component

BrotherHobby Avenger 2510 Motor

By BrotherHobby

The BrotherHobby Avenger 2510 Motor is an FPV drone propulsion component offered in 930KV, 1250KV and 1380KV specifications. It combines aluminum casing components, a hollow titanium alloy shaft and N52H arc magnets, with 5-7S LiPo support and a stated weight of 55g including 25cm SR wires.

HAKRC 65A miniF7 Stack flight controller and ESC boards with orange mounting spacers
Component

HAKRC 65A miniF7 Stack

HAKRC

The HAKRC 65A miniF7 Stack combines a flight controller and BLHeli-32 65A four-in-one ESC for UAV integration. Its two boards share 20 * 20mm mounting spacing. Six serial ports, onboard sensors, Type-C USB and a DJI O3 connector provide integration options, with separate voltage limits for each board.

GEPRC Fettec G4 Alpha GF50A STACK flight controller and ESC circuit board stack
Component

GEPRC Fettec G4 Alpha GF50A STACK

By GEPRC

The GEPRC Fettec G4 Alpha GF50A STACK is an FPV flight-control electronics package pairing a G4 Alpha controller with a GF50A four-in-one ESC. It provides SH1.0 connections, DJI digital and analog video integration, and 2~6S LiPo input support, with signal cables, power accessories and mounting hardware included.

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC GEP-GR2306 1600kv motor with silver top, black body, threaded shaft and black wires
Motors & ESCs

GEP-GR2306 1600kv motors

By GEPRC

The GEPRC GEP-GR2306 1600kv propulsion motor is suitable for 6–7 inch propellers and long-range flight. It combines a 12N14P configuration, hollow 4mm shaft, 7075 aluminum body and N52H arc magnets. Motor weight is 32g excluding wire; LiPo cell-count entries differ between 3~6S and 4~6S.