Product overview
The BrotherHobby Avenger 2510 Motor is a propulsion component for FPV drones. Its physical construction combines an Al 7075 base casing and bell cap with a hollow titanium alloy shaft. Internally, the motor uses a 12N14P configuration, a stator made from 0.15mm Nippon Steel silicon steel, and N52H arc magnets in the rotor. Japanese NMB 9X4X4 bearings complete the specified bearing arrangement. The motor specification lists three KV options: 930KV, 1250KV and 1380KV.
For installation, the motor has an M3 bolt pattern measuring 16mmX16mm and an M5 propeller adapter shaft thread. These dimensions define the stated mounting and propeller attachment interfaces for integration into an aircraft. Electrical integration is specified for 5-7S LiPo batteries, with 18AWG wires measuring 25cm in length. The stated weight is 55g with 25cm SR wires included, so that wiring configuration forms part of the mass figure when allocating weight within a build.
Specifications
| Specification | Value & conditions |
|---|---|
| KV options | 930KV/1250KV/1380KV |
| Base casing | Al 7075 |
| Stator | 0.15mm Nippon Steel silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft | Titanium alloy hollow shaft |
| Battery cell count | 5-7SLiPo battery. |
| Bolt pattern | M3 (16mmX16mm) |
| Bearings | Japanese NMB 9X4X4 |
| Rotor magnets | N52H arc magnets |
| Weight | 55gWith 25cm SR wires. |
| Wire gauge and length | 18AWG, 25cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby Avenger 2510 Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
