The G29*9.5 is a G Series propeller from ZHT Technology Co., Ltd., carrying a 29*9.5-inch size designation. Its supplied configuration consists of two pieces per pair, with each pair containing two propellers of this model.
The G29*9.5 from ZHT Technology Co., Ltd. is a propeller in the G Series power-system component range. It carries a 29*9.5-inch size designation.
The supplied configuration consists of two propellers per pair.
| Specification | Value & conditions |
|---|---|
| Manufacturer | ZHT Technology Co., Ltd. |
| Model | G29*9.5 |
| Product category | G Series propeller |
| Propeller size designation | 29*9.5 inches |
| Supplied configuration | 2 propellers per pair |
The MAD ENCR V105 eVTOL Autocenter motor combo is an electronic feathering propulsion package comprising a motor, ESC and propeller. Offered in 170KV with CW or CCW rotation options, it uses a magnetic encoder to position stopped blades for reduced drag during fixed-wing flight.
The HOBBYWING MSC 40x13.1 is a fixed carbon-fiber/epoxy propeller for industrial UAV propulsion. Each propeller weighs 224g and supports direct rotor locking or quick-release mounting. Recommended for the V11122 motor, it has an optimum speed range of 1100~2800 r/min and typical thrust of 15.0~25.0kg.
The T-MOTOR AUZ 24×12 Fixed-Wing Carbon Fiber Propeller is a carbon composite propulsion component for fixed-wing, flying wing, and VTOL UAV integration. Matched with the AT7224 motor, it supports operation at up to 7350 RPM, with up to 24kg recommended thrust and a 30kg maximum limit.
The Maytech MT35A-BEC-HE is a Harrier Eco series speed controller.
The GEPRC TAKER F405 BL32 70A STACK is a UAV electronics assembly pairing an STM32F405 flight controller with a 70A 4-in-1 ESC. Designed for direct DJI Air Unit integration, it supports 3-6S LiPo power and includes connection cables, a capacitor and mounting hardware.
The Scorpion Tribunus III 14-220A is an electronic speed controller supporting up to 14-cell Li-HV configurations for helicopter and airplane size classes. Its described architecture includes a 5 V–12 V BEC, 8 AWG wiring, enclosed capacitors, and a temperature-controlled fan port.
A gate driver designed for multirotor and FPV motor control.
The GEPRC GEP-F722-45A AIO V2 is an integrated flight controller and ESC board for drone builds. It combines an STM32F722 processor, 42688 motion sensing, five UART ports and a DJI Air Unit connector in a 32x32mm package, supplied with power and connection accessories.
The EMAX ECO II 6215 is a brushless aircraft motor for heavy-lift multirotors and long-endurance platforms. Available in 180KV and 200KV configurations for 12S systems, it combines a 24N28P framework with M4 mounting provisions, silicone leads and supplied propeller attachment hardware. Recommended propeller sizes depend on the selected winding.
The T-MOTOR HEP-L 28*9 is a carbon-fiber composite propeller for long-endurance multirotor UAVs. Its one-piece construction incorporates a PMI core, with an average individual weight of 59 g. A defined flange interface and recommended 12S motor combinations guide integration, while separate usual, recommended-maximum and limit specifications define its operating envelope.