ChinaDrone.Request a quote ↗
COMPONENTZHTAERO

ZHTAERO G20*6.5

Company: ZHT Technology Co., Ltd. ↗

The ZHTAERO G20*6.5 is a G Series propeller offered as a two-piece pair, with a stated size of 20*6.5 inches. It is a power-system accessory from ZHT Technology Co., Ltd., supplied as propellers rather than a complete aircraft.

Get a free sourcing quote for ZHTAERO G20*6.5

G20*6.5 propeller pair with black blades and central mounting holes
G20*6.5 propeller pair with black blades and central mounting holes
ManufacturerZHT Technology Co., Ltd.
ModelG20*6.5
Product categoryG Series propeller
Nominal propeller size20*6.5 inches
Supplied quantity2 pieces per pair

Product overview

The ZHTAERO G20*6.5 is a propeller in the G Series power-system accessory range. Its stated size is 20*6.5 inches, providing the dimensional designation for procurement. The product is a propeller component rather than a complete flight platform or an airframe kit.

The supplied configuration is two propellers per pair. Procurement quantities should therefore distinguish individual propellers from pairs: one pair contains two pieces. The G20*6.5 model designation and 20*6.5-inch size identify the specific propeller configuration.

Specifications

SpecificationValue & conditions
ManufacturerZHT Technology Co., Ltd.
ModelG20*6.5
Product categoryG Series propeller
Nominal propeller size20*6.5 inches
Supplied quantity2 pieces per pair

Ask for the ZHTAERO G20*6.5 price ↑

More motors, ESCs & propellers from Chinese manufacturers →
Scorpion A2-7422-200kv motor in black and gold, shown from two angles
Component

Scorpion A2-7422-200kv (70cc / 6900w / 12s)

By Scorpion

The Scorpion A2-7422-200kv (70cc / 6900w / 12s) is a BLDC motor for freestyle and UAV airplane propulsion. Supplied with mounting hardware and electrical connectors, it provides 4150 Watts continuous power and 6900 Watts intermittent peak power. Integration requires allowance for the motor body, prop spacer and mounting accessories, with peak operation constrained by duration and cooling.

F405 80A FPV Stack with stacked circuit boards and connecting wires
Component

DolphinRC F405 80A FPV Stack

DolphinRC

The DolphinRC F405 80A FPV Stack is an FPV flight-control electronics product built around an STM32F405 controller and ICM42688P gyroscope. Its 36*36mm board combines Betaflight support, onboard sensors, OSD and black-box functions with GPS and DJI Air Unit connections, four UARTs, and regulated 5V and 12V outputs.

HAKRC HKF4126 AIO flight controller and ESC board with USB connector
Component

HAKRC HKF4126 AIO

HAKRC

The HAKRC HKF4126 AIO, listed as the HAKRC F411 35A AIO, is a compact flight-controller and ESC board supplied as one controller. It combines onboard sensing, OSD and current measurement with 2S-6S LiPo input, 35A continuous current and 40A peak current.

Maytech MTCC2892TQF folding propeller pair with black carbon-fiber blades and mounting clamps.
Component

Maytech MTCC2892TQF Folding Propeller

By Maytech

The Maytech MTCC2892TQF Folding Propeller is a 28 x 9.2 inch UAV propulsion component using carbon fiber and PMI Aviation Bubble composite material. Its blade-and-clamp package targets agricultural, photography and spraying drones, with 20 mm or 31 mm clamp options and customizable mounting holes. Exact package composition and mounting requirements need configuration confirmation.

EMAX BL5335 brushless motor with blue housing and silver end cover
Component

EMAX BL5335

By EMAX

The EMAX BL5335 is a BL Series brushless motor intended for general propulsion, aircraft builds and custom engineering applications, with a design focus on FPV performance tuning. It has a listed stator size of 5335 and weighs 1198g.

KEEP EXPLORING

Similar products

Browse all products ↗
Scorpion HK-4540 SIGNATURE motor with gold end caps, black body and exposed shaft
Motors & ESCs

Scorpion HK-4540 Motor - SIGNATURE

By Scorpion

The Scorpion HK-4540 Motor - SIGNATURE is a helicopter propulsion motor for 700 or 800 class installations. It offers six winding choices, a 315~580 RPM / Volt range and 12S to 18S LiPo support. Its integration requirements include a 30mm mounting pattern, M4 screw holes and regular bearing maintenance.