The A60 Terrain-following radar from ZHT Technology is a micro radar device designed for terrain following. It uses millimeter-wave sensing and is identified as a radar component, with terrain following as its stated purpose.
The A60 Terrain-following radar is a micro radar sensor intended for terrain following. Its sensing technology uses millimeter waves.
The product is identified as an individual radar component. Its micro designation describes its form, without establishing numerical dimensions or weight.
| Specification | Value & conditions |
|---|---|
| Model | A60 Terrain-following radar |
| Radar technology and form | Millimeter-wave micro radar |
| Purpose | Terrain following |
The CZI ES838 Electronic Launcher is a riot-control payload for the DJI Matrix M300 RTK Series. Its specified configuration carries eight electrically triggered 38mm rounds in a quick-change compartment. The 1109±10g assembly uses DJI SkyPort V2.0, supports DJI remote-control operation and has a 25W power rating.
The TINTEC TL2S is a compact payload-release accessory for the Max4T platform, combining one hook, PSDK control and belly mounting. It measures ≤ 60 × 40 × 20 mm and weighs 50 ± 5 g. Capacity is up to 1 kg; routine payloads within 500 g are recommended, subject to aircraft limits, installation, battery, environment and applicable regulations.
The Caddx Ant is a compact analog FPV camera for freestyle, exploration and cinematic flying. It combines a 1/3-inch CMOS sensor, 1200 TVL resolution and a default 1.8mm lens in a roughly 2g package. CVBS output requires an analog video transmitter, while bracket adaptation supports 19 × 19mm mounting.
HOBBYWING SPRAY 9L, originally named HW 9L-Spray, is a centrifugal nozzle for agricultural drones. It has a rated flow of 5 L/min and maximum flow of 9 L/min, with a recommended 12–18S LiPo battery, 4–12 m spraying width and 35–500 μm droplet granularity.
The Forlinx Embedded OK3519A-C is an embedded imaging development board supporting aerial UAV camera applications. It combines a HiSilicon processor module, Linux software and camera, display, networking and serial interfaces. Video processing includes 4K encoding/decoding and panoramic stitching; chip procurement lead times limit its suitability for new projects.
Tatusky Technology Co., Ltd’s TTSKL03 is an integrated handheld drone detection and positioning device with a 6.0-inch display and 12,000 mAh battery. It passively receives drone signals and decodes supported data links for identification and location information, with a 0–3 km+ detection range dependent on environment and drone type.
The Tatusky Technology Co., Ltd TTSK-TL-TDY-C06 is a portable counter-drone system combining passive RF detection, UAV identification and GNSS navigation spoofing. Its integrated architecture includes Jetson AGX Orin computing, a 13.3-inch touchscreen and remote connectivity. A removable 518Wh battery supports 6.5 hours of continuous operation, alongside unattended operation features.
The Zenmuse H20 combines wide-angle imaging, zoom imaging and laser rangefinding.
The Shanghai Terjin FTA1 TDOA+AOA Drone Detector combines passive drone detection, identification and direction finding with networked location. A single unit determines direction, while multiple units locate drones using TDOA. It supports spectrum monitoring, network expansion and interconnection with jammers.
The BWSENSING BW-IMU225E is a CAN inertial measurement unit for unmanned aircraft, robotics and vehicle integration. Packaged and bare-board configurations provide different installation envelopes. It combines gyroscope and accelerometer measurements with 500 Hz output, a 9–36 V DC supply range, temperature compensation and specified electrical immunity ratings.