ChinaDrone.Request a quote ↗
COMPONENT

TTSKL03 Handheld Drone Detection and Positioning Equipment

By Tatusky Technology Co., Ltd ↗

Tatusky Technology Co., Ltd’s TTSKL03 is an integrated handheld drone detection and positioning device with a 6.0-inch display and 12,000 mAh battery. It passively receives drone signals and decodes supported data links for identification and location information, with a 0–3 km+ detection range dependent on environment and drone type.

Get a free sourcing quote for TTSKL03 Handheld Drone Detection and Positioning Equipment

TTSKL03 handheld drone detection and positioning device with two antennas and a map display, held in one hand.
TTSKL03 handheld drone detection and positioning device with two antennas and a map display, held in one hand.
ModelTTSKL03 Handheld Drone Detection and Positioning Equipment
Detection and identification functionsCRPC 2.0 data-link decoding extracts drone image and video streams, serial numbers, geographic location, flight trajectory, altitude, speed, and remote controller position.Specific data formats supported by the data-link decoding solution.
Working PrinciplePassive detection, no electromagnetic signal transmission
Detection Frequency Bands900 MHz, 1.2 GHz, 2.4 GHz, 5.8 GHz, Wi-Fi
Sensitivity≤ –100 dBm
Detection Range0–3 km+ (varies by environment and drone type)Varies by environment and drone type.

Product overview

Tatusky Technology Co., Ltd’s TTSKL03 Handheld Drone Detection and Positioning Equipment supports portable monitoring for low-altitude security. Its CRPC 2.0 data-link decoding extracts information from specific drone data formats, including serial numbers, location, trajectory, altitude, speed, image and video streams, and remote controller position. Passive reception covers 900 MHz, 1.2 GHz, 2.4 GHz, 5.8 GHz and Wi-Fi without electromagnetic signal transmission. Detection and trajectory tracking each support ≥ 10 drones simultaneously. The 0–3 km+ detection range varies with environment and drone type; positioning accuracy of ≤ 3 m applies only to decodable drones.

The integrated handheld unit combines a 6.0-inch screen and 12,000 mAh battery in a 177 × 89 × 29.5 mm body, with ±2 mm dimensional tolerance. Connection provisions comprise one Type-C port, two SMA antenna connectors, one 3.5 mm audio output and one SIM card slot. Weight is ≤ 580 g without antenna, with ±0.05 kg tolerance; each antenna weighs ≤ 46 g. Operating time is 3–4 hours, and charging from 0–100% takes ≤ 3 hours at DC 9 V / 2 A. The enclosure is rated IP54, with operation specified from –20 °C to +50 °C.

Specifications

SpecificationValue & conditions
ModelTTSKL03 Handheld Drone Detection and Positioning Equipment
Detection and identification functionsCRPC 2.0 data-link decoding extracts drone image and video streams, serial numbers, geographic location, flight trajectory, altitude, speed, and remote controller position.Specific data formats supported by the data-link decoding solution.
Working PrinciplePassive detection, no electromagnetic signal transmission
Detection Frequency Bands900 MHz, 1.2 GHz, 2.4 GHz, 5.8 GHz, Wi-Fi
Sensitivity≤ –100 dBm
Detection Range0–3 km+ (varies by environment and drone type)Varies by environment and drone type.
Response Time≤ 5 seconds
Simultaneous Detection Capacity≥ 10 drones
Simultaneous Trajectory Tracking≥ 10 drones
Positioning Accuracy≤ 3 m (for decodable drones only)For decodable drones only.
Drone Database (Geolocation)DJI (OcuSync protocol), MAVLink drones, Parrot, TBS Crossfire, and others
Maximum Detection Speed≥ 60 km/h (for decodable drones only)For decodable drones only.
Display6.0-inch screen
Battery Capacity12,000 mAh
Operating Time3–4 hours
External InterfacesType-C ×1; SMA antenna connectors ×2 (external thread & internal socket); 3.5 mm audio output ×1; SIM card slot ×1SMA antenna connectors have external thread and internal socket.
Charging SpecificationsDC 9 V / 2 A
Charging Time≤ 3 hours (0–100%)Charging from 0–100%.
Power Consumption≤ 15 W
Dimensions177 × 89 × 29.5 mm (±2 mm)Dimensional tolerance ±2 mm.
Weight≤ 580 g (±0.05 kg, without antenna); ≤ 46 g per antennaDevice weight excludes antenna and carries ±0.05 kg tolerance; antenna weight is per antenna.
Operating Temperature–20 °C to +50 °C
Storage Environment15–25 °C; 25–65% RHStorage environment.
Ingress Protection RatingIP54
Detection Distance3KM
Detection Quantity≥ 10 drones at the same timeSimultaneous detection.

Ask for the TTSKL03 Handheld Drone Detection and Positioning Equipment price ↑

More payloads & thermal cameras from Chinese manufacturers →
CZI SC99 tree diameter measuring instrument mounted on a tree trunk with measuring tape
Component

CZI SC99

CZI

The CZI SC99 is a 180g tree diameter measuring instrument with a growth-following tape, low-light charging and wireless data transmission. Its forestry monitoring architecture supports stationary LoRa relays and drone-carried relay collection where network signals are unavailable, with map-based monitoring and automatic growth trend charts.

MRDVS S11 dToF RGB-D camera, front view with three sensor windows and a black vented housing.
Component

MRDVS S11

MRDVS

The MRDVS S11 is a compact solid-state dToF RGB-D camera for obstacle avoidance, spatial perception and mapping in mobile robotics. Its Ethernet and USB configurations provide depth, color and IR amplitude outputs in a 90 mm × 25 mm × 25 mm package, with configuration-dependent weight and power requirements.

GEPRC Super Buzzer module with black buzzer and built-in battery
Component

GEPRC Super Buzzer

By GEPRC

The GEPRC Super Buzzer is a compact FPV aircraft locator with a built-in battery, LED and 100-decibel alarm. It connects to a Betaflight flight controller's buzzer signal line and automatically sounds and flashes after power-off, helping indicate a missing aircraft's approximate position by sound.

Xingkai XK-C130 thermal camera module with black housing and front lens
Component

Xingkai XK-C130

Xingkai

The Xingkai Technology XK-C130 is a miniature thermal camera module for integration into drones, aircraft and RC FPV vehicles. It combines a 256×192 uncooled infrared detector with adjustable focus, PAL CVBS analog output and 4.5–18V power input. Specifications cover 4mm and 10mm lens configurations, and a protective lens cover is included.

HYUCX CH09PRO handheld UAV locator with two antennas and a carrying case
Component

HYUCX CH09PRO

HYUCX

The HYUCX CH09PRO is a handheld UAV detection and location device for site security and public safety operations. It combines spectrum detection, DroneID and RemoteID reception, a touchscreen map, and standalone or networked operation. Detection range is 1-3 km, with support for 10+ simultaneous drone targets.

Shenzhen Jiangzhizai Innovation Technology Co.,Ltd. SP-3 M400 Exterior Wall Cleaning Kit
Component

Jiangzhizai SP-3

By Shenzhen Jiangzhizai Innovation Technology Co.,Ltd.

The Shenzhen Jiangzhizai Innovation Technology Co., Ltd. SP-3 is an under-fuselage aerial cleaning attachment with single-nozzle and dual-nozzle configurations. It combines articulated spraying, lidar surface sensing and M400 integration for facade and curved-surface cleaning. The dual-nozzle version adds airborne switching between clean-water and foam spraying.

KEEP EXPLORING

Similar products

Browse all products ↗
Cameras & sensors

CADDX Ratel 2

Caddx

The CADDX Ratel 2 is a compact analog FPV camera for freestyle and racing applications on most FPV drones of 3 inches and above. It combines a 1/1.8-inch sensor, 1200TVL resolution and Super WDR with selectable 165°/160° views, a 19mm × 19mm format and DC 4.5-36V input.

AirSentinel airborne drone detection unit with antennas and four handheld receivers
Cameras & sensors

Aero Future AirSentinel

Aero Future

Jiangxi Aero Future Technology Innovation Group Co., Ltd’s AirSentinel is a drone detection system combining an airborne radio detection unit and handheld receiver. It supports FPV signal detection, RemoteID decoding, warning broadcasts and intercepted video forwarding, with interfaces for integration on unmanned platforms or at fixed sites.

Drone-TB-H handheld drone detector with two antennas and a map on its screen
Cameras & sensors

Tabebuia Drone-TB-H

By Wuhan Tabebuia Technology Co., Ltd

The Wuhan Tabebuia Technology Co., Ltd Drone-TB-H is a compact, battery-powered handheld passive RF drone detector with DJI O3/O4 and Remote ID decoding. It supports drone and pilot location, directional detection and multiple alert modes. Detection distance and weight have differing highlighted and technical specifications, without a stated configuration distinction.

HYUCX TQ02 drone detection system with a white dome on a tripod and a connected equipment box.
Cameras & sensors

HYUCX TQ02

HYUCX

The HYUCX TQ02 is an integrated ground-based drone detection, positioning, and countermeasures system for vehicle-mounted or fixed deployment. It operates offline, detects signals across 100MHz~6GHz, and supports simultaneous tracking of multiple drones. Its ≤30kg enclosure measures 600mm in diameter by 420mm high and carries IP65 protection.