Product overview
The Caddx Ant is an analog FPV camera for aircraft integration, with CVBS output that requires an analog video transmitter. Its imaging architecture combines a 1/3-inch CMOS sensor, 1200 TVL horizontal resolution and a default 1.8mm lens. NTSC or PAL video and 16:9 or 4:3 image formats provide configuration choices for the video installation. Global WDR, backlight compensation, automatic gain control and 3D noise reduction support image adjustment, while the OSD menu provides controls for exposure, white balance, image enhancement and video standard.
The camera occupies a 14 × 14mm body footprint, with bracket adaptation to 19 × 19mm mounting and an approximately 2g net weight. Integration must accommodate its DC 3.7–18V input, −20°C to +60°C operating temperature and 20%–80% operating humidity. The supplied configuration comprises one camera, one OSD menu board, two silicone cables with 2-pin and 3-pin connections, a 1.5mm hex key and a warranty card. Minimum illumination is specified as 0.001Lux at F1.2, and the greater-than-52dB signal-to-noise figure applies with automatic gain control switched off.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | Caddx Ant |
| Product type and purpose | Analog FPV camera for FPV flying, racing and freestyle; outputs CVBS and requires an analog video transmitter.Requires an analog video transmitter. |
| Image sensor | 1/3" CMOS Sensor |
| Horizontal resolution | 1200 TVL |
| Television system | NTSC or PAL |
| Menu support | Supported |
| Image aspect ratio | 16:9 or 4:3 |
| Synchronization | Internal |
| Electronic shutter | PAL: 1/50-100,000; NTSC: 1/60~100,000PAL or NTSC video system, as specified. |
| Signal-to-noise ratio | Greater than 52dB (AGC OFF)AGC OFF. |
| Video output | CVBS |
| Lens | 1.8mm (default)Default lens configuration. |
| Minimum illumination | 0.001Lux@F1.2F1.2. |
| Automatic gain control | Yes |
| Backlight compensation | Yes |
| Wide dynamic range | Global WDR |
| Noise reduction | 3D DNR |
| Dimensions | 14*14mm (bracket to 19*19mm)19*19mm mounting configuration uses a bracket. |
| Mounting adaptation | 14mm → 19mm with adapter plateWith adapter plate. |
| Power input | DC 3.7-18V |
| Operating temperature | -20°C~+60°C |
| Operating humidity | 20%~80% |
| Weight | 2g (N.W)Net weight. |
| Approximate net weight | Approximately 2.0gApproximate net weight. |
| Supplied configuration | Camera ×1; OSD menu board ×1; 2-pin silicone cable ×1; 3-pin silicone cable ×1; 1.5mm hex key ×1; warranty card ×1. |
| OSD adjustments | OSD adjustments include exposure, white balance, image enhancement and video standard. |
| Application emphasis | Freestyle, exploration and cinematic flying |
Request a quote for Caddx Ant
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
