ChinaDrone.Request a quote ↗
COMPONENT

Wuhan Tabebuia Technology Co., Ltd Anti Drone-TB-II

By Wuhan Tabebuia Technology Co., Ltd ↗

The Wuhan Tabebuia Technology Co., Ltd Anti Drone-TB-II integrates drone detection and navigation spoofing with map-based management. It has a 5km detection range, an 800m spoofing range and an 18kg, IP67-rated enclosure. Its 5m positioning accuracy applies to specific DJI models.

Get a free sourcing quote for Wuhan Tabebuia Technology Co., Ltd Anti Drone-TB-II

Anti Drone-TB-II drone detection and navigation spoofing unit with upright antennas and a ribbed enclosure
Anti Drone-TB-II drone detection and navigation spoofing unit with upright antennas and a ribbed enclosure
ModelAnti Drone-TB-II
Detection frequency bands900Mhz, 1.2Ghz, 1.4Ghz, 2.4Ghz, 5.2Ghz, 5.8Ghz
Detection range5km
Positioning accuracy5mSpecific DJI models.
Navigation spoofing range800m
Simulated navigation modesGPS, Gluashs, BDS, Gal

Product overview

The Wuhan Tabebuia Technology Co., Ltd Anti Drone-TB-II combines drone detection and navigation spoofing in an integrated counter-UAV unit. Its physical specifications are 512 × 462 × 232mm and 18kg, with IP67 protection and 60W power consumption. Real-time analysis of drone broadcast channels supports locating aircraft and pilots. For operational integration, a map interface displays drone locations, while integration with network-management software supports centralized control of the system.

Detection operates across six frequency bands: 900Mhz, 1.2Ghz, 1.4Ghz, 2.4Ghz, 5.2Ghz and 5.8Ghz. The detection range is 5km, while navigation spoofing has a separate 800m range. Navigation simulation modes are GPS, Gluashs, BDS and Gal. The 5m positioning accuracy applies specifically to certain DJI models. Targeted spoofing supports selected DJI series; for non-DJI drones, the system can simulate no-fly zones to induce landing. These model-specific capabilities qualify the system’s positioning and intervention functions.

Specifications

SpecificationValue & conditions
ModelAnti Drone-TB-II
Detection frequency bands900Mhz, 1.2Ghz, 1.4Ghz, 2.4Ghz, 5.2Ghz, 5.8Ghz
Detection range5km
Positioning accuracy5mSpecific DJI models.
Navigation spoofing range800m
Simulated navigation modesGPS, Gluashs, BDS, Gal
Power consumption60W
Protection ratingIP67
Dimensions512 × 462 × 232mm
Weight18kg
Integrated functionsIntegrated drone detection and navigation spoofing.
Location analysisReal-time analysis of drone broadcast channels supports locating drones and pilots.
Management integrationA map interface displays drone locations, with network-management software integration for centralized control.
Targeted spoofingTargeted navigation spoofing.Selected DJI series.
Simulated no-fly zonesSimulation of no-fly zones to induce landing.Non-DJI drones.

Ask for the Wuhan Tabebuia Technology Co., Ltd Anti Drone-TB-II price ↑

More flight controllers & GNSS from Chinese manufacturers →
CUAV C-RTK 3 G5 GNSS module with black housing and side mounting tabs.
Component

CUAV C-RTK 3 G5 GNSS Module

By CUAV

The CUAV C-RTK 3 G5 GNSS Module is a navigation component for unmanned systems, combining multi-band satellite reception, RTK positioning and configurable dual-antenna heading. Its compact processor-and-compass hardware supports DroneCAN, CAN FD, UART and USB integration, with local data logging and signal-protection functions. Positioning mode, antenna spacing and baseline length qualify its performance.

GEPRC TAKER F405 BLS 80A 8S STACK flight controller and ESC assembly with white connectors and USB-C port
Component

GEPRC TAKER F405 BLS 80A 8S STACK

By GEPRC

The GEPRC TAKER F405 BLS 80A 8S STACK is a UAV electronics assembly pairing an F405 flight controller with an 80A four-in-one ESC. It supports 3-8S LiPo power, direct DJI Air Unit connection and 30.5×30.5mm mounting. The stack package includes connection cables, a filter board, battery wiring and mounting hardware.

Unicore UM980C GNSS RTK positioning module with a silver shield and gold contact pads.
Component

Unicore UM980C

By Unicore

The Unicore UM980C is a multi-constellation, multi-frequency GNSS positioning module intended for integration into UAV and precision-agriculture systems. Its NebulasIV architecture supports RTK and several PPP-related modes in a 54-pin LGA package. Procurement should account for firmware-dependent interfaces, shared CAN/UART resources, paid correction-service support and measurement qualifications.

Happymodel CrazyF411 AIO F4 flight controller board with micro-USB port and gold solder pads
Component

Happymodel CrazyF411 AIO F4 FC built-in 20/25A ESC OSD/Frsky diversity receiver for Toothpick

Happymodel

The Happymodel CrazyF411 AIO F4 FC is a compact flight-controller board for toothpick UAV builds, integrating a 20A-per-channel four-in-one ESC, diversity receiver, Betaflight OSD and power monitoring. Its 6.3g architecture supports 2–4S operation, two UARTs and several receiver protocols, with firmware-specific binding procedures and a five-second limit on 25A peak ESC current.

HKF4120 AIO flight-control and ESC board shown at an angle
Component

HAKRC HKF4120 AIO

HAKRC

The Shenzhen Haike Technology Co., Ltd. HKF4120 AIO is an integrated flight-control and ESC board with a 20 × 20mm mounting pattern and 10g net weight. It combines onboard sensing, OSD and dual BEC outputs with 3S–6S LiPo input, specified 35A continuous current and 40A peak current. The supplied configuration is one AIO assembly.

Xingkai XK-M08 handheld ground control station with screen, dual joysticks and red emergency stop button
Component

Xingkai Handheld GCS XK-M08

Xingkai

The Xingkai Handheld GCS XK-M08 is a portable ground control station combining an industrial PC, data-link remote control and a 10.1-inch touchscreen. It supports mission planning, vehicle and payload control, remote monitoring and live video display, with physical controls and multiple interfaces housed in a 2.3 Kg aluminium enclosure.

KEEP EXPLORING

Similar products

Browse all products ↗
Flight control & navigation

BWSENSING IMU427C

BWSENSING

The BWSENSING IMU427C is a compact Modbus inertial measurement unit for integration into unmanned aircraft, robotics and other motion-related systems. Its packaged gyroscope and accelerometer provide angular-rate and acceleration measurements, with sampling up to 500 Hz, multiple serial interfaces, compensation functions and a -40 °C to +85 °C temperature range.

Flight control & navigation

BWSENSING BW-IMU100

BWSENSING

The BWSENSING BW-IMU100 is a compact, low-cost inertial measurement unit with gyroscope and accelerometer functions for unmanned aircraft, robotics and stabilization applications. It measures 55 × 37 × 24 mm and offers selectable RS232, RS485 or TTL output, temperature and motion compensation functions, IP67 protection and operation from -40°C to +85°C.

CUAV C-Compass CAN electronic compass with black housing, CAN port and mounting tab
Flight control & navigation

CUAV C-Compass CAN

By CUAV

The CUAV C-Compass CAN is a 13g external electronic compass for unmanned-system heading measurement. It combines an STM32F4 processor, RM3100 sensor and CUAV-developed M4C firmware in an aluminum-alloy housing. DroneCAN communication supports integration with ArduPilot and PX4 controllers, while magnetic filtering reduces interference from internal electrical components.