COMPONENT

T-MOTOR P12*4 propeller pair

The T-MOTOR P12*4 is a polished carbon-fiber and epoxy propeller.

Material and surfaceCarbon fiber and epoxy; polishedListed specification for the 12*4 model.

Operating limitsThrust limitation: 4 kg; ambient temperature: -40 to 65 °C; optimum speed: 5000–9000 RPM/minListed for the 12*4 model; the speed range is described as optimum, not as an absolute maximum.

Preflight inspectionCheck condition before flight and replace faulty propellers.Required before flight.

InstallationUse medium-strength or stronger anaerobic screw-locking glue.When installing propellers onto motors.

Product overview

The P12*4 is supplied as a pair. Its specification identifies a two-blade integrated design with a polished surface and carbon-fiber and epoxy material.

For the 12*4 model, T-MOTOR lists a thrust limitation of 4 kg, an ambient temperature range of -40 to 65 °C and an optimum speed range of 5000–9000 RPM/min.

T-MOTOR instructs users to check the propellers before flight and replace them if a fault is found.

Installation requires medium-strength or stronger anaerobic screw-locking glue when attaching the propellers to motors.

Specifications

Specification	Value & conditions
Material and surface	Carbon fiber and epoxy; polishedListed specification for the 12*4 model.
Operating limits	Thrust limitation: 4 kg; ambient temperature: -40 to 65 °C; optimum speed: 5000–9000 RPM/min Listed for the 12*4 model; the speed range is described as optimum, not as an absolute maximum.
Preflight inspection	Check condition before flight and replace faulty propellers.Required before flight.
Installation	Use medium-strength or stronger anaerobic screw-locking glue.When installing propellers onto motors.

SOURCE WITH CHINADRONE

Request a quote for T-MOTOR P12*4 propeller pair

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗

Flight control & navigation

HOBBYWING XRotor FPV G2 65A 4in1 ESC & FC F7 Combo

By HOBBYWING

The HOBBYWING XRotor FPV G2 65A 4in1 ESC & FC F7 Combo is an FPV electronics stack pairing a four-in-one ESC with an F7 flight controller. 65 A × 4 and 3–6S LiPo for the ESC, with separate component application specifications.

View product →Enquire ↗

Motors & ESCs

Dualsky EG2000

By Dualsky

The Dualsky EG2000 is a 45mm EG capsuled motor for GPS sports. The EG2000 designation identifies the motor, while its stated physical description combines the 45mm size with the EG capsuled format for this application.

View product →Enquire ↗

Motors & ESCs

Scorpion A-6528-180kv V2

By Scorpion

The Scorpion A-6528-180kv V2 is a BLDC motor for acrobatic, sport and UAV airplanes, supplied with mounting hardware and connectors. It is designed for 24–26-inch propellers on 12s batteries. Continuous power is 4218 Watts; 7200 Watts peak power applies to intermittent full-throttle usage of 5–60 seconds depending on use case and cooling.

View product →Enquire ↗

Motors & ESCs

Professional LCD Program Box

By HOBBYWING

The HOBBYWING Professional LCD Program Box configures supported ESCs through standalone LCD operation or PC USB connection. It requires 4.8-6V and an additional battery pack when the ESC lacks a built-in BEC. XERUN V3 operation requires a program box software update. Production has stopped; the Multifunction LCD Program Box replaces it.

View product →Enquire ↗