T-MOTOR MN5006 Antigravity Type 4-6S UAV Motor KV450

The T-MOTOR MN5006 Antigravity Type KV450 is a lightweight brushless UAV motor for aerial photography, surveying and mapping. Designed for 4-6S LiPo operation, it combines centrifugal cooling, a 24N28P configuration and heat-resistant winding materials. The motor weighs 106g including cable and comes with a hardware pack.

T-MOTORDrone motor

KV: 300
Peak current: 20 A
Motor weight: 108 g
Rated voltage: 4-6S

Product overview

The T-MOTOR MN5006 Antigravity Type 4-6S UAV Motor KV450 is a lightweight brushless motor for professional aerial photography, surveying and mapping. The KV450 version operates with 4-6S LiPo batteries and weighs 106g including its cable. Its idle current is 0.9A at 22V, with a peak current of 26A and maximum power of 650W, each specified for 180s. Recommended components are an AIR 40A ESC and P14-18” propellers. Each package contains one motor in the selected KV and one hardware pack.

The Φ55.6*30mm motor uses a 24N28P configuration, centrifugal cooling and imported 696ZZ bearings. Its imported silicon steel sheet stator receives anti-rust treatment and coatings resistant to 180℃. The copper wire has Level H heat resistance at 180℃, while the magnets have Level E heat resistance at 150℃. The coil insulation test is 500V. Rotor and motor dynamic balance standards are ≤15mg and ≤10mg respectively. An 80mm lead cable accompanies the motor, and the package measures 106*81*35mm with a weight of 170g.

Motors & ESCs

Specifications

T-MOTOR MN5006 Antigravity Type 4-6S UAV Motor KV450 specifications
Specification	Value & conditions
Product and applications	T-MOTOR Antigravity MN5006 brushless UAV motor for aerial photography, surveying and mapping.
Motor size	Φ55.6*30mm
Copper wire	180℃ high temperature resistance: Level H
Configuration	24N28P
Centrifugal cooling design	YES
Shaft diameter	IN: 6mm
Rotor dynamic balance standard	≤15mg
Bearing	Imported 696ZZ
Motor dynamic balance standard	≤10mg
Magnet level	150℃ high temperature resistance: Level E
Packing size	1068135mm
KV	300KV300 variant.
Rated voltage	4-6SLiPo battery; KV300 and KV450 variants.
Idle current	0.6AKV300 variant; 22V.
ESC recommendation	AIR 40AKV300 and KV450 variants.
Peak current	20AKV300 variant; 180s.
Propeller recommendation	P17-18”KV300 variant.
Maximum power	500WKV300 variant; 180s.
Motor weight	108gKV300 variant; including cable.
Internal resistance	125mΩKV300 variant.
Package weight	170gKV300 and KV450 variants.
KV	450KV450 variant.
Idle current	0.9AKV450 variant; 22V.
Peak current	26AKV450 variant; 180s.
Propeller recommendation	P14-18”KV450 variant.
Maximum power	650WKV450 variant; 180s.
Motor weight	106gKV450 variant; including cable.
Internal resistance	60mΩKV450 variant.
Package contents	1 × T-MOTOR MN5006 motor in the selected KV; 1 × hardware pack.Supplied motor KV follows the selected option.
Stator, insulation and lead cable	Imported silicon steel sheet stator with anti-rust treatment and 180 ℃ high temperature-resisting coatings; coil insulation test: 500V; lead cable: 80mm.Coil insulation test: 500V.