ChinaDrone.Request a quote ↗
COMPONENT

MN5212 Multirotor Fixed Wing UAV Motor KV340

By T-MOTOR ↗

The T-MOTOR MN5212 KV340 is a UAV propulsion motor for multirotor, VTOL and fixed-wing installations. Supplied with a hardware pack, it has a Φ59×33.5mm envelope, 600mm cables and 4-8S LiPo support. Its 840W power and 35A current ratings carry a 180-second qualification, and regular lubrication is recommended.

Request a quote ↗
Manufacturer and modelT-MOTOR MN5212 Multirotor Fixed Wing UAV Motor KV340
ApplicationsMultirotor, VTOL and fixed-wing UAVs
Report numberMN.00030
Internal resistance69mΩ
Motor configuration24N22P
Shaft diameter4mm

Product overview

The T-MOTOR MN5212 KV340 is a propulsion motor for multirotor, VTOL and fixed-wing UAV integration. Its 24N22P configuration combines a 52mm-diameter, 12mm-high stator with a 4mm shaft inside a Φ59×33.5mm motor envelope. Installation planning must accommodate 600mm cables in 16# AWG and a mass of 249g including those cables, or 205g without them. Dynamic balance, precise assembly, high-speed response and efficient cooling are its stated design features. The supplied configuration comprises one motor and one hardware pack.

Electrical integration supports 4-8S LiPo batteries, with 69mΩ internal resistance and 1.1A idle current at 10V. The KV340 power and current limits are 840W and 35A respectively, each qualified by a 180-second duration. Maximum thrust is specified as 4.3kg, with an approximate 1000-hour MTBF and regular lubrication recommended for maintenance. Matching guidance identifies the T-MOTOR P17*5.8 propeller, Air 60A 2-6S ESC and ALPHA 40A 6S ESC; these components are separate from the listed motor-and-hardware package.

Specifications

SpecificationValue & conditions
Manufacturer and modelT-MOTOR MN5212 Multirotor Fixed Wing UAV Motor KV340
ApplicationsMultirotor, VTOL and fixed-wing UAVs
Report numberMN.00030
Internal resistance69mΩ
Motor configuration24N22P
Shaft diameter4mm
Motor dimensionsΦ59×33.5mm
Stator diameter52mm
Stator height12mm
Wire gauge16# AWG
Cable length600mm
Motor weight with cables249gIncluding cables.
Motor weight without cables205gExcluding cables.
Supported cell count4-8SLiPo battery.
Idle current1.1AAt 10V.
Maximum power840WMN5212 KV340; 180 seconds.
Maximum continuous current35AMN5212 KV340; 180 seconds.
Maximum thrust4.3kg
MTBFAbout 1000 hours
Supplied equipment1 × T-MOTOR MN5212 KV340 motor; 1 × hardware packKV340 configuration.
Matching componentsT-MOTOR P17*5.8 propeller; Air 60A 2-6S ESC; ALPHA 40A 6S ESC
MaintenanceRegular lubrication recommended
Design featuresDynamic balance, precise assembly and high-speed response
CoolingEfficient cooling
SOURCE WITH CHINADRONE

Request a quote for MN5212 Multirotor Fixed Wing UAV Motor KV340

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
HOBBYWING RTF 80A 4in1 8S Lite AT electronic speed controller board with copper bars and blue mounting grommets.
Motors & ESCs

HOBBYWING RTF 80A 4in1 8S Lite AT

By HOBBYWING

The HOBBYWING RTF 80A 4in1 8S Lite AT is a four-channel brushless ESC for FPV drone integration. Published specifications list 4–8S LiPo input and 80A continuous/100A peak per channel. Its compact assembly includes copper heat-dissipation bars, damping grommets and a supplied capacitor. Confirm these values and the firmware for the selected configuration.

DYS BE4114 brushless motor with gold housing, visible copper windings and attached wires.
Motors & ESCs

DYS BE4114 brushless motor

By DYS

The DYS BE4114 is a 350KV brushless outrunner motor intended for multicopter propulsion. Its published specifications describe a compact motor component for 5–6S LiPo integration, with configuration-dependent load data. Procurement assessment should confirm mounting details, package contents and the table's voltage/battery pairings, while distinguishing load-point figures from maximum continuous ratings.

Motors & ESCs

P24*7.2-10mm Hole Prop-2PCS/PAIR

By T-MOTOR

The T-MOTOR P24*7.2-10mm Hole Prop-2PCS/PAIR supplies two polished carbon-fiber-and-epoxy UAV propellers with an integrated two-blade design. Its 10mm mounting hole, specified dimensions, 15kg thrust limitation and optimum rotational-speed range guide propulsion integration. Installation requires threadlocking adhesive, secure accessories and preflight inspection.