ChinaDroneRequest a quote →

RadioMaster RP1 V2 ExpressLRS 2.4ghz Nano Receiver

The RadioMaster RP1 V2 ExpressLRS 2.4ghz Nano Receiver is a compact radio control receiver with a CRSF interface, built-in Wi-Fi and temperature-compensated frequency control. It weighs 2.2g including its antenna and comes with a 65mm UFL T antenna, CRSF wire and user manual.

RadioMasterRC transmitters & receivers
Weight
2.2g (Including antenna)
Dimensions
13 mm*11 mm*3 mm

Get a free quote

Product overview

The RadioMaster RP1 V2 ExpressLRS 2.4ghz Nano Receiver provides an open-source radio control link using ExpressLRS and LoRa technology. It supports 2.4GHz ExpressLRS modules and transmitters with built-in 2.4GHz ExpressLRS. Its 13mm × 11mm × 3mm dimensions and 2.2g weight, including the antenna, suit compact installations. The receiver operates at 5v across a frequency range of 2.404–2.479 Ghz, with 10mW telemetry RF power and a CRSF bus interface. ExpressLRS v2.4 firmware comes pre-installed.

A built-in temperature-compensated crystal oscillator stabilizes frequency control as temperature varies. The PCB incorporates improvements for heat dissipation, a top-mounted LED and solder pads designed for easier soldering. A UFL socket connects the upgraded rigid antenna, while built-in Wi-Fi enables firmware updates and configuration through the WebUI from a PC or mobile phone. The package supplies one RP1 receiver, one 65mm UFL 2.4Ghz T antenna, one user manual and one CRSF wire.

Links & controllers

Specifications

RadioMaster RP1 V2 ExpressLRS 2.4ghz Nano Receiver specifications
SpecificationValue & conditions
ProductRadioMaster RP1 V2 ExpressLRS 2.4ghz Nano Receiver
ItemRP1 Nano ExpressLRS 2.4ghz Receiver
TypeISM
Telemetry RF power10mW
Antenna65mm 2.4ghz T Antenna
Frequency range2.404 - 2.479 Ghz
Maximum receive refresh rate500Hz / F1000Hz
Minimum receiver refresh rate25Hz
Working voltage5v
Weight2.2g (Including antenna)Including antenna.
Dimensions13mm*11mm*3mm
Firmware versionExpressLRS v2.4 pre-installedPre-installed firmware.
Firmware targetRadioMaster RP1/2 2400 RX
Bus interfaceCRSF
Radio control technologyOpen-source ExpressLRS radio control link using LoRa technology
Antenna connectionUFL antenna socket for full-range antenna use
Wireless configurationBuilt-in Wi-Fi for firmware upgrades and WebUI configuration from a PC or mobile phone
PCB constructionImproved PCB design for better heat dissipation
Antenna constructionUpgraded rigid antenna
LED positionTop side of PCB
Solder padsImproved solder pads for easier soldering
Frequency stabilizationBuilt-in temperature-compensated crystal oscillator for stable, accurate frequency control
CompatibilityAll 2.4GHz ExpressLRS modules and transmitters with built-in 2.4GHz ExpressLRS
Package contents1 × RP1 ExpressLRS 2.4ghz Nano Receiver; 1 × 65mm UFL 2.4Ghz T Antenna; 1 × User Manual; 1 × CRSF wireIncluded equipment.

Related guides