ChinaDroneRequest a quote →

RadioMaster XR4 Gemini Xrossband Dual-Band ExpressLRS Receiver

The RadioMaster XR4 Gemini Xrossband Dual-Band ExpressLRS Receiver combines true diversity reception, twin LR1121 transceivers and selectable Gemini operating modes for radio control links. Its compact construction includes CRSF and UART interfaces, Wi-Fi configuration and pre-installed ExpressLRS firmware. Two dual-band T-antennas, a CRSF wire, heat-shrinkable tubes and a manual card are supplied.

RadioMasterRC transmitters & receivers
Weight
1.7g (without antenna)
Dimension
22 mm * 18 mm * 4 mm

Get a free quote

Product overview

The RadioMaster XR4 Gemini Xrossband Dual-Band ExpressLRS Receiver provides a radio control link with true diversity reception across 2.4GHz and Sub-G 900MHz. Two independent RF circuits with twin Semtech LR1121 transceivers support selectable Gemini single-frequency and Gemini Xrossband dual-band operation. Gemini modes use both antennas on the selected band, while Gem-X assigns Ant 1 to 868/915Mhz and Ant 2 to 2.4Ghz. The receiver supports ExpressLRS 2.4GHz, Sub-G 900MHz, Gemini and Gemini Xrossband protocols.

Built around an ESP32D4 MCU, the XR4 measures 22mm * 18mm * 4mm and weighs 1.7g without antenna. It operates on DC 4.5 - 8.4V and provides CRSF and UART bus interfaces, plus castled pads for soldering. ExpressLRS v3.5.1 comes pre-installed, and integrated Wi-Fi enables firmware updates and configuration through a WebUI on a PC or mobile device. The package contains one receiver, two dual-band T-antennas, one CRSF wire, three heat-shrinkable tubes and one manual card.

Links & controllers

Specifications

RadioMaster XR4 Gemini Xrossband Dual-Band ExpressLRS Receiver specifications
SpecificationValue & conditions
ItemXR4 Gemini Xrossband Dual-Band Receiver
MCUESP32D4
RF ChipLR1121 x 2
RF connectorIPEX-1 X 2
AntennaDual-Band T Antenna x 2 (Included)Included equipment.
Frequency Range2.4GHz / Sub-G 900MHz
Telemetry Power100mw
Maximum receive refresh rateDK500Hz / K1000Hz
Minimum receiver refresh rate50Hz
Working voltageDC 4.5 - 8.4V
Weight1.7g (without antenna)Without antenna.
Dimension22mm * 18mm * 4mm
Firmware VersionExpressLRS v3.5.1 pre-installedPre-installed firmware.
FW TargetRadioMaster XR4 2.4/900 Gemini RX
Bus interface 1CRSF
Bus interface 2UART
Antenna frequency assignmentAnt 1 = 2.4Ghz; Ant 2 = 2.4GhzGemini 2.4Ghz mode.
Antenna frequency assignmentAnt 1 = 868/915Mhz; Ant 2 = 868/915MhzGemini SubG mode.
Antenna frequency assignmentAnt 1 = 868/915Mhz; Ant 2 = 2.4GhzGemini Xrossband (Gem-X) mode.
Receiver architectureTrue diversity dual-band receiver with dual LR1121 RF transceivers
RF circuits and operating modesTwo independent RF circuits; switchable Gemini single-frequency and Xrossband dual-band modes
Protocol compatibilityExpressLRS 2.4GHz, Sub-G 900MHz, Gemini & Gemini Xrossband (Gem-X)
Wi-Fi configuration and updatesIntegrated Wi-Fi supports firmware updates and configuration through WebUIVia WebUI on a PC or mobile device.
Soldering padsCastled pads for easy soldering
Package contents1 * XR4 Gemini Xrossband Dual-Band Receiver; 2 * Dual-Band T-Antenna; 1 * CRSF Wire; 3 * Heat-Shrinkable Tube; 1 * Manual CardIncluded equipment.

Related guides