ChinaDroneRequest a quote →

Rctimer u-Blox CN-06 GPS Receiver V3.1

The Rctimer u-Blox CN-06 GPS Receiver V3.1 combines a u-blox NEO-6M GPS module with a built-in ceramic patch antenna and a UART (TTL) interface. It includes configuration memory, a rechargeable lithium battery, power and fix LEDs, and reverse polarity protection for input power.

RCTimerDrone GPS
Update rate
5 Hz

Get a free quote

Product overview

The Rctimer u-Blox CN-06 GPS Receiver V3.1, model code CN06-3.1, is built around a u-blox NEO-6M GPS module with a 5Hz update rate. Its built-in ceramic patch antenna measures 25 x 25 x 4mm, and the receiver includes an LNA and SAW chip. A 32k I2C EEPROM stores configuration, while a 3V rechargeable lithium battery forms part of the receiver’s hardware. Power and fix indicator LEDs provide visible status indications.

The receiver provides a UART (TTL) port with EMI protection and uses the standard NMEA protocol by default. Its default baud rate is 9600, with rates up to 115200 supported. Default navigation and TIMEPULSE rates are both 1Hz, with TIMEPULSE associated with the fix LED. The power circuitry includes a 3.3V low-noise LDO regulator and reverse polarity protection for input power.

Flight control & navigation

Specifications

Rctimer u-Blox CN-06 GPS Receiver V3.1 specifications
SpecificationValue & conditions
ProductRctimer u-Blox CN-06 GPS Receiver V3.1
Model codeCN06-3.1
GPS moduleU-blox NEO-6M
Update rate5Hz
Configuration memory32k I2C EEPROM for saving configuration
Built-in antenna25 x 25 x 4mm ceramic patch antenna
Signal componentsLNA and SAW chip
Voltage regulator3.3V low-noise LDO regulator
Communication portUART (TTL) port with EMI protection
Battery3V rechargeable lithium battery
Status indicatorsPower and fix indicator LEDs
Input power protectionReverse polarity protection
ProtocolStandard NMEADefault parameters.
Baud rate9600, up to 115200Default baud rate is 9600.
Navigation rate1HzDefault parameters.
TIMEPULSE rate1HzDefault parameters; fix LED.

Related guides