KST SV30-12 is a servo from KST Meizhou Company Limited, classified in the Ultra Giant Servo product class. Its procurement identity consists of the KST manufacturer name, the SV30-12 model designation and that servo classification.
The KST SV30-12 is a servo manufactured by KST Meizhou Company Limited. Its product identity is SV30-12.
The SV30-12 belongs to the Ultra Giant Servo product class within KST’s servo range.
| Specification | Value & conditions |
|---|---|
| Manufacturer | KST Meizhou Company Limited |
| Model | SV30-12 |
| Product class | Ultra Giant Servo |
The MAD BSC 3120 Hight Effective Class FPV Drone Motor is a propulsion component for medium-to-large FPV platforms. It combines a 3120 stator and 12N14P configuration with three KV/battery options, defined mechanical interfaces and 300 mm cables. Matching recommendations cover propellers and ESCs.
The T-MOTOR U8 Lite L Efficiency Multirotor UAV Motor KV110 is an endurance-oriented propulsion component with a 282g weight including cable and maximum thrust of 11.2kg. It combines waterproof and dustproof construction with customized bearings. The supplied package contains one KV110 motor and hardware pack, with T-MOTOR G30*10.5 propeller matching guidance.
The Scorpion HKII-2208-28 is a 39-gram brushless motor for helicopter and ducted fan applications, with a 3125 RPM / Volt rating and maximum 3s LiPo specification. Supplied with connectors, heat shrink and mounting screws, it requires a separate adapter for propeller use and regular bearing maintenance.
The BrotherHobby Avenger 2510 Motor is an FPV drone propulsion component offered in 930KV, 1250KV and 1380KV specifications. It combines aluminum casing components, a hollow titanium alloy shaft and N52H arc magnets, with 5-7S LiPo support and a stated weight of 55g including 25cm SR wires.
The HAKRC 65A miniF7 Stack combines a flight controller and BLHeli-32 65A four-in-one ESC for UAV integration. Its two boards share 20 * 20mm mounting spacing. Six serial ports, onboard sensors, Type-C USB and a DJI O3 connector provide integration options, with separate voltage limits for each board.
The GEPRC Fettec G4 Alpha GF50A STACK is an FPV flight-control electronics package pairing a G4 Alpha controller with a GF50A four-in-one ESC. It provides SH1.0 connections, DJI digital and analog video integration, and 2~6S LiPo input support, with signal cables, power accessories and mounting hardware included.
The T-MOTOR FLAME 180A 12S V2.0 is a multirotor UAV electronic speed controller supporting 6-12S LiPo batteries, 180A continuous current and 200A peaks for 10 seconds. It combines a layered structure, IP56 protection and protective functions, and is supplied with a hardware kit.
The MAD Antimatter M6C10 EEE is a multirotor UAV brushless propulsion motor available in four KV versions. Its D:72 × 31.4 mm body, rain protection and defined mounting interfaces support aircraft integration. Selection requires matching battery voltage, ESC and propeller to the chosen version; KV alone does not determine payload capacity or flight time.
The GEPRC GEP-F722-35A AIO is a compact flight-controller and ESC electronics package for UAV integration. It combines an STM32F722 controller, five UARTs and a DJI air-unit connector on an 8.8g board. It accepts 2~6S LiPo input, provides 35A continuous current and uses a current mounting pattern of 25.5×25.5mm.
