ChinaDrone.Request a quote ↗
COMPONENT

Antimatter M6C10 EEE

By MAD Components ↗

The MAD Antimatter M6C10 EEE is a multirotor UAV brushless propulsion motor available in four KV versions. Its D:72 × 31.4 mm body, rain protection and defined mounting interfaces support aircraft integration. Selection requires matching battery voltage, ESC and propeller to the chosen version; KV alone does not determine payload capacity or flight time.

Request a quote ↗
MAD Antimatter M6C10 EEE 150KV brushless motor with black housing and exposed copper windings
MAD Antimatter M6C10 EEE 150KV brushless motor with black housing and exposed copper windings
Product purposeMAD Antimatter M6C10 EEE brushless motor for multirotor UAV propulsion.
Available KV150KV, 200KV, 250KV, 300KV
Motor dimensionsD:72 × 31.4 mm
Motor leads60 mm 16# Awg(Black) silicone
ProtectionRain protection
Motor data modelMAD M6C10 EEE V2.0

Product overview

The MAD Antimatter M6C10 EEE is a brushless motor for multirotor UAV propulsion, offered in 150KV, 200KV, 250KV and 300KV versions. Its D:72 × 31.4 mm dimensions establish the basic installation envelope, and its leads are 60 mm black silicone cables in 16# AWG. The motor has rain protection. Integrating the selected version requires a suitable battery voltage, ESC and propeller, together with checks of installation clearance and the motor and propeller mounting patterns.

The MAD M6C10 EEE V2.0 configuration has 14 pole pairs, an anticorrosive stator, independent centrifugal heat dissipation and 696ZZ*2 bearings. Its shaft diameter notation is IN: 6 mm. Three propeller mounting patterns and two motor mounting patterns define its mechanical interfaces. Varnished wire and magnet degree values are 180°C and 150°C, respectively. Rotor balance is ≤5 mg and motor balance is ≤10 mg. Thrust and current assessment requires the exact propulsion combination; KV alone does not determine payload capacity or flight time.

Specifications

SpecificationValue & conditions
Product purposeMAD Antimatter M6C10 EEE brushless motor for multirotor UAV propulsion.
Available KV150KV, 200KV, 250KV, 300KV
Motor dimensionsD:72 × 31.4 mm
Motor leads60 mm 16# Awg(Black) silicone
ProtectionRain protection
Motor data modelMAD M6C10 EEE V2.0
Number of pole pairs14MAD M6C10 EEE V2.0.
StatorAnticorrosiveMAD M6C10 EEE V2.0.
Varnished wire degree180°CMAD M6C10 EEE V2.0.
Magnet degree150°CMAD M6C10 EEE V2.0.
Centrifugal heat dissipationIndependentMAD M6C10 EEE V2.0.
Rotor balance≤5 mgMAD M6C10 EEE V2.0.
Propeller mounting holesD:12 M3×4,D:18 M3×4,D:22 M3×4MAD M6C10 EEE V2.0.
Motor balance≤10 mgMAD M6C10 EEE V2.0.
Shaft diameterIN: 6 mmMAD M6C10 EEE V2.0.
Motor mounting holesD:25 M3×4, D:32 M4×4MAD M6C10 EEE V2.0.
Bearing696ZZ*2MAD M6C10 EEE V2.0.
Disruptive test500 VMAD M6C10 EEE V2.0.
Propulsion integrationMatch battery voltage, ESC and propeller to the selected KV version. Assess thrust and current for that exact combination and check mounting patterns before installation. KV alone does not determine payload capacity or flight time.Selected KV version matched with a suitable battery voltage, ESC and propeller.
SOURCE WITH CHINADRONE

Request a quote for Antimatter M6C10 EEE

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Scorpion HK5-4015-805kv motor on the left, beside the 1125KV variant.
Motors & ESCs

Scorpion HK5-4015-805kv

By Scorpion

The Scorpion HK5-4015-805kv is a 257.8-gram BLDC motor intended primarily as a lower-power option for the SAB RAW 500 helicopter. It combines internal and external fan cooling with 1330-watt continuous power. The specified LiPo maximum is 6s, with higher cell counts possible through appropriate gear ratio adjustment. Connectors, heat shrink and hardware are included.

MAD Components 8X-08 M8SC08 drone arm set with motor and propeller
Motors & ESCs

8X-08 M8SC08 drone arm set

By MAD Components

The MAD 8X-08 M8SC08 is an ultralight industrial multirotor drone arm set with field-oriented control and neatly arranged cabling. Options include 85KV or 100KV, clockwise or counterclockwise rotation, and green or red LEDs. Specified thrust is 2-3kgF per rotor, with an 8kgF maximum per rotor.

T-MOTOR VL1032 VTOL Propulsion Kit showing motor, propeller and electronic speed controller
Motors & ESCs

T-MOTOR VL1032 VTOL Propulsion Kit

By T-MOTOR

The T-MOTOR VL1032 VTOL Propulsion Kit combines a KV180 motor and FOC ESC for heavy-lift VTOL UAVs, with up to 32 kg thrust per arm and a recommended quadcopter MTOW of 50–55 kg. The kit specifies 12S operation; the recommended carbon fiber propeller is sold separately.