The KST CM1610 is a Clubman servo from KST Meizhou Company Limited.
The KST CM1610 is a servo from KST Meizhou Company Limited, classified in the Clubman servo range.
| Specification | Value & conditions |
|---|---|
| Manufacturer | KST Meizhou Company Limited |
| Model | KST CM1610 |
| Product category | Clubman servo |
HOBBYWING’s XRotor 20A 4S BLDC is a multirotor brushless ESC offered in four regional configurations. The current table lists 20A continuous/30A peak current, 2-6S LiPo support, and no BEC. Version-specific dimensions and weights, supplied wiring, and unsupported control features are relevant to procurement and installation.
The T-MOTOR AUZ 16*10 is a one-piece carbon fiber composite propeller for electric fixed-wing UAV propulsion. Its published configuration combines a PMI foam core, matte finish and flange mounting. Procurement should verify motor fit, distinguish recommended operating maxima from absolute published limits, and treat the supplied performance data as condition-specific manufacturer measurements.
Feiyu Motor 2807, designated 2807P-1350KV, is a lightweight motor for 7-inch small FPV drones. It combines a laminated silicon-steel core, alloy-steel shaft and plated rotor housing in a 33 mm diameter × 36 mm envelope. Its specification includes 6S operation, 1100 W maximum power and a weight of 57 g ± 3 g including wires.
The CKESC FLY 60A from Nanchang Changkong Technology Co., Ltd. is a 3~4S electronic speed controller for fixed-wing aircraft. Its 30 g wired package incorporates a 5 V, 3 A switching BEC. Standard and high-speed versions have distinct motor-speed ratings, while the 60 A continuous current rating requires specific cooling conditions.
The GEPRC TAKER F722 BT 8Bit 60A STACK is a UAV electronics assembly pairing an F722 flight controller with a 60A four-in-one ESC. It provides 3–6S LiPo operation, onboard logging, a barometer and direct DJI Air Unit connection. Boards, cables and mounting hardware are supplied; the current batch lacks Bluetooth wireless parameter tuning.
The FlashHobby H450 Helicopter Motor is a propulsion component offered in 1850KV and 3800KV configurations. It combines a 9N/6P architecture with a 3.5 mm shaft and male connector. Each configuration has distinct LiPo cell ranges, ESC recommendations and continuous electrical limits, with peak current and power ratings limited to two seconds.
The Shenzhen Haike Technology Co., Ltd. HKF4120 AIO is an integrated flight-control and ESC board with a 20 × 20mm mounting pattern and 10g net weight. It combines onboard sensing, OSD and dual BEC outputs with 3S–6S LiPo input, specified 35A continuous current and 40A peak current. The supplied configuration is one AIO assembly.
The T-MOTOR AT3530 Long Shaft KV580 is a brushless propulsion motor for fixed-wing and VTOL aircraft applications. Supplied with a hardware pack, it combines triple bearings and lateral cooling vents. Procurement planning should account for its installation envelope, 4-6S LiPo rating, time-qualified electrical limits and configuration-dependent reference bench data.
The HOBBYWING H11MD is an integrated industrial-UAV propulsion set combining a motor, FOC ESC and 48-inch carbon-fiber propellers. Intended for heavy-duty multirotor and VTOL applications, it offers PWM/CAN throttle redundancy, monitoring and maintenance functions. Integration specifications include a 50mm arm tube outer diameter and a recommended 14S battery.
The T-MOTOR A6-M-12S is a modular UAV propulsion system configured with an A6-M KV160 motor, 12S FOC 40A ESC and folding polymer propeller. It specifies 25 mm tube integration, a recommended 12S LiPo battery and PWM/CAN control. Rated thrust is 2–2.5 kg, with a specified maximum of 7.4 kg.