Product overview
The Kimpok AL1206 is an FM FPV video transmitter module for RC drone integration, with 16 selectable channels across 1080-1360MHz. Its physical assembly combines a three-layer aluminum alloy shell and a large centrifugal fan. At 44 × 28.6 × 14.7mm and 25.3g, the module provides a defined installation envelope for the aircraft integrator. The electrical interfaces include a DC 7-30V (2-8S) supply input, a typical 1V±0.2Vp-p video input and an SMA antenna interface rated at 50 Ohms.
Output settings span PIT, 25mW, 200mW, 1W and 6W, allowing selection through a single button with RGB status lighting. Flight controller setup uses the DATA pin, with IRC Tramp identified as the control protocol. The operating temperature range is -10°C to +70°C. Installation requires secure mounting while avoiding vibration and high temperatures, and an antenna must be connected before use because operation without it risks damage. Although power filtering is built in, the supply must still avoid excessive interference.
Specifications
| Specification | Value & conditions |
|---|---|
| Place of origin | China |
| Brand | Kimpok |
| Certification | CE |
| Model | AL1206 |
| Product type | FPV video transmitter |
| Frequency band | 1080-1360MHz |
| Frequency precision | ±200KHzTypical. |
| Channel count | 16 CH |
| Output power settings | PIT/25mW/200mW/1W/6W |
| Modulation | FM |
| Power supply | DC 7-30V (2-8S) |
| Frequency control | PLL |
| Video input level | 1V±0.2Vp-pTypical. |
| Control protocol | IRC Tramp |
| Signal-to-noise ratio | Greater than 55dBcFor ±3MHz. |
| Antenna interface | SMA, 50 Ohms |
| Operating temperature | -10°C to +70°C |
| Dimensions | 44 × 28.6 × 14.7mm |
| Weight | 25.3g |
| Band A frequencies | 1080, 1120, 1160, 1200, 1240, 1280, 1320, 1360MHzChannels CH1 through CH8, respectively. |
| Band B frequencies | 1200, 1220, 1240, 1258, 1280, 1300, 1320, 1340MHzChannels CH1 through CH8, respectively. |
| Housing and cooling | Three-layer aluminum alloy shell with a large centrifugal fan for heat dissipation. |
| Power amplifier and calibration | Power amplifier and power calibration intended to maintain consistent output across channels. |
| PLL architecture | Customized digital PLL circuit with chip-level integration. |
| Local controls and indicators | Single button with RGB indication: blue for band, red for channel and green for power level. |
| PIT mode indication | Continuous green illumination indicates PIT mode.When the green LED remains continuously illuminated. |
| Flight controller connection | Connect the DATA pin for flight controller setup; the protocol specification identifies IRC Tramp.For setup through a flight controller. |
| Antenna connection requirement | Connect an antenna before operation to avoid risk of product damage.Before use. |
| Mounting requirements | Mount securely and avoid vibration and high temperatures.During installation and operation. |
| Power interference limitation | Built-in power filtering does not remove the need to avoid excessive power supply interference.With the built-in power filter. |
