ChinaDrone.Request a quote ↗
COMPONENT

DMKR 1.2G 2W 9CH FPV Analog VTX

By SHENZHENSHI LANGSHITE Electronics Co., Ltd ↗

The DMKR 1.2G 2W 9CH FPV Analog VTX is an analog video transmitter module for long-range UAV video links. It is not a flight platform or airframe kit. It works in the 1.2GHz band with 9 channels and offers pit mode, 25mW and 2W output. It accepts 7–36V DC input, supports IRC-Tramp control and uses an aluminum shell.

Request a quote ↗
DMKR 1.2G 2W 9CH FPV Analog VTX module with silver housing and orange vents
DMKR 1.2G 2W 9CH FPV Analog VTX module with silver housing and orange vents
Power OutputPit/25mW/2W
Frequency1.2GHz
Channel9CH
Input Voltage7–36V DC (2–8S LiPo)
Input Current235mA@Pitmode – 360mA@25mW – 880mA@2000mWAt 12V input
Control ProtocolIRC-Tramp

Product overview

The DMKR 1.2G 2W 9CH FPV Analog VTX is a standalone analog video transmitter module, not a flight platform or airframe kit. It is built for long-range UAV video transmission, where a stable link matters more than small size or low power consumption. It operates in the 1.2GHz band with nine channels. Output can be set to pit mode, 25mW or 2W, so the module can be configured for short-range testing or for long-range flight missions. With IRC-Tramp protocol support, its parameters can be adjusted remotely through a flight controller or OSD system.

The module has an aluminum shell, a 30.5×30.5mm mounting-hole pattern and an MMCX antenna connector. Its 7–36V DC input range covers 2–8S LiPo packs, so it can connect directly to common UAV battery systems without an extra voltage regulator. At 12V, it draws 235mA in pit mode, 360mA at 25mW and 880mA at 2000mW. Install the antenna before powering on, and check that the input voltage is correct before connecting the module. Avoid improper wiring, which can damage the module, and provide sufficient cooling during high-power operation.

Specifications

SpecificationValue & conditions
Power OutputPit/25mW/2W
Frequency1.2GHz
Channel9CH
Input Voltage7–36V DC (2–8S LiPo)
Input Current235mA@Pitmode – 360mA@25mW – 880mA@2000mWAt 12V input
Control ProtocolIRC-Tramp
Mounting Holes30.5×30.5mm
Antenna ConnectorMMCX
Shell MaterialAluminum
Antenna installation requirementAntenna must be installed before powering on
Cooling requirementSufficient cooling required during high-power operationDuring high-power operation
Voltage check requirementVerify correct voltage input before connection
Wiring cautionAvoid improper wiring to prevent module damage
SOURCE WITH CHINADRONE

Request a quote for DMKR 1.2G 2W 9CH FPV Analog VTX

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
RadioLink R6DS receiver with antenna lead and connector pins
Links & controllers

RadioLink R6DS

By RadioLink

The RadioLink R6DS is a 25*15mm, 3.4g miniature receiver for radio-controlled aircraft and other models. It offers six PWM channels or ten channels in combined output modes, plus RSSI telemetry. Supplied as one receiver with a packaging bag, it requires 3-6V power and specifies 600m airborne range subject to flight conditions.

Links & controllers

MALUS CB15

By Bytech Technology Co., Ltd.

The Bytech Technology Co., Ltd. MALUS CB15 is a ground control console for remote unmanned equipment. Three joysticks, 54 buttons and a colour display provide access to aircraft, gimbal, dock and payload functions through a management platform. It supports Windows, wired operation with charging, and wireless control up to 30m.