Product overview
The HOBBYWING XRotor Pro H200A 14S BLDC / BLDC IPC family provides electronic speed controllers for multirotor and VTOL propulsion integration. Its physical construction combines an aluminium-alloy housing and lightweight nano-coating with a high-TG PCB, 3oz base copper, full copper filling and double-sided heat dissipation. The shell-edge design accommodates installation on multirotor and fixed-wing aircraft. For the specifically named XRotor Pro H200A-14S-BLDC, the enclosure measures 116 × 56 × 31.5mm and weighs 270g without cables, defining the controller space and cable-free mass to account for during integration.
The XRotor Pro H200A-14S-BLDC accepts 6–14S power at 18–63V and operates from -40°C to 65°C. Its 100A continuous rating requires good heat dissipation; 200A peak current is limited to three seconds. Its cable configuration uses two 260mm 10AWG silicone input cables, three 200mm 10AWG silicone output cables, one 450mm shielded 5-pin signal cable and two JR 3-pin male connectors. This BLDC model supports throttle and communication isolation, CAN digital throttle and CAN-plus-PWM dual signals. PWM inputs accept 5V or 3.3V at 50–500Hz with 1100–1940μs pulses; throttle travel calibration is unavailable.
For the XRotor Pro H200A-14S-BLDC, ingress protection is IP55 with custom IP67, propeller positioning is optional with adjustable maximum working current, and fault storage holds 2–48 hours of operating data and fault codes. Firmware updates are supported, and its DataLink version is DataLinkBox G3. That accessory has separate specifications: UART, CAN, RS485, USB* and Bluetooth* telemetry, 6–81V input, 67 × 52.8 × 15mm dimensions and 50g weight. The H200A BLDC IPC configuration specifically provides intelligent propeller control for VTOL and drone-dock applications, including adjustable positioning-current parameters to help prevent motor overheating.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and product family | HOBBYWING XRotor Pro H200A 14S BLDC / BLDC IPC electronic speed controllers for multirotor and VTOL propulsion. |
| Specification model | XRotor Pro H200A-14S-BLDC |
| Input voltage | 6–14S (18–63V)XRotor Pro H200A-14S-BLDC. |
| Continuous current | 100A with good heat dissipation.XRotor Pro H200A-14S-BLDC; good heat dissipation. |
| Peak current | 200A for 3 seconds.XRotor Pro H200A-14S-BLDC; 3-second duration. |
| Operating temperature | -40°C to 65°CXRotor Pro H200A-14S-BLDC. |
| Communication protocol | CAN (custom serial port)XRotor Pro H200A-14S-BLDC. |
| Isolation mode | Throttle and communication isolation supported.XRotor Pro H200A-14S-BLDC. |
| Firmware update | Supported.XRotor Pro H200A-14S-BLDC. |
| Digital throttle | Supported through CAN.XRotor Pro H200A-14S-BLDC; CAN interface. |
| PWM input signal level | 5V / 3.3VXRotor Pro H200A-14S-BLDC. |
| Throttle signal frequency | 50–500HzXRotor Pro H200A-14S-BLDC. |
| Operating pulse width | 1100–1940μsXRotor Pro H200A-14S-BLDC. |
| Throttle travel calibration | Not supported.XRotor Pro H200A-14S-BLDC. |
| Double throttle signal | Supported using CAN + PWM.XRotor Pro H200A-14S-BLDC; CAN + PWM. |
| Propeller positioning | Optional; maximum positioning working current is adjustable.XRotor Pro H200A-14S-BLDC; optional propeller positioning. |
| Fault storage | 2–48 hours of operating data and fault-code storage.XRotor Pro H200A-14S-BLDC. |
| Ingress protection rating | IP55; custom IP67.XRotor Pro H200A-14S-BLDC; IP67 is a custom configuration. |
| Weight without cables | 270g without cables.XRotor Pro H200A-14S-BLDC; without cables. |
| Size | 116 × 56 × 31.5mmXRotor Pro H200A-14S-BLDC. |
| Cable configuration | Input: two 10AWG silicone cables, 260mm each. Output: three 10AWG silicone cables, 200mm each. Signal: one shielded 5-pin cable, 450mm, and two JR 3-pin male connectors.XRotor Pro H200A-14S-BLDC. |
| DataLink version | DataLinkBox G3XRotor Pro H200A-14S-BLDC. |
| Telemetry accessory specifications | DataLinkBox G3 telemetry: UART, CAN, RS485, USB*, Bluetooth*. Voltage: 6–81V. Size: 67 × 52.8 × 15mm. Weight: 50g.DataLinkBox G3 accessory. |
| Housing and installation | Aluminium-alloy housing with lightweight nano-coating and a shell-edge design for installation on multirotor and fixed-wing drones. |
| PCB and thermal architecture | High-TG construction with 170°C temperature resistance, 3oz PCB base copper, full copper filling and double-sided heat dissipation. |
| Intelligent propeller control | Intelligent propeller control for VTOL and drone-dock applications, with open parameter settings including maximum propeller-positioning current to help prevent motor overheating.H200A BLDC IPC configuration. |
| Motor-control features | BLDC control with intelligent timing and DEO, including an algorithm upgrade for high-KV UAV motors. |
| Protection and recording architecture | Power-on self-test; low-voltage, overvoltage, throttle-loss and overcurrent protection; automatic fault-code recording; millisecond-level data recording using built-in high-speed ROM. |
Request a quote for HOBBYWING XRotor Pro H200A 14S BLDC / BLDC IPC
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
