Product overview
The T-MOTOR MN1315 KV100 is a motor for heavy-lift multirotor UAVs used in logistics and delivery, fire rescue and emergency supply, and agricultural or forestry crop spraying. Its intended configurations include four-, six- and eight-rotor aircraft, as well as coaxial arrangements. The recommended propulsion combination pairs this KV100 motor with an M248A14S ESC, a VZ40 ×16.1 propeller and a 14S LiPo supply. Rated thrust per arm is 20–25 kg; the maximum per-arm figure is 50.1 kg, while the motor specification gives a separate maximum thrust value of 50 kg.
The motor measures 150 mm in diameter and 51 mm in height, and weighs 1780 g including its cable. It uses a 36N42P configuration, 6904ZZ bearings and 150 mm enameled-wire connections. Its stator coatings have a temperature-resistance specification of 150°C, compared with 220°C for the copper wire and 180°C for the magnets. The motor carries an IP45 protection rating and an operating temperature range of −30°C to 55°C. Customization options include coating, logo, a temperature sensor, KV, mounting hole pattern and cable length.
Specifications
| Specification | Value & conditions |
|---|---|
| Model number | MN1315 |
| Motor dimensions | Diameter 150 × 51 mm |
| Stator coating | 150°C high-temperature-resistant coatings |
| Copper wire temperature resistance | 220°C |
| Magnet temperature resistance | 180°C |
| Coil insulation test | 1000 V withstand voltage testPublished coil insulation test specification. |
| Ingress protection | IP45 |
| Motor configuration | 36N42P |
| Rotor dynamic balance standard | ≤30 mg |
| Bearing | Imported 6904ZZ |
| Output shaft diameter | /The specification table provides a slash rather than a shaft diameter. |
| Wire specification and length | Enameled wire × 150 mm |
| KV value | 100 |
| Idle current | 5.7 APublished idle current at 20 V. |
| Maximum power | 3300 WPublished maximum power has a 180-second qualification; the separate reference test table reports higher power readings, so confirm the applicable operating limit. |
| Internal resistance | 7.5 mΩ |
| Rated voltage | 14SSpecified for a LiPo battery configuration. |
| Peak current | 248 A |
| Maximum thrust | 50 kgSpecification-table value; 50.1 kg per arm. Test-bench data are for reference only. |
| Package weight | 2400 gPackage weight; this is distinct from motor weight including cable. |
| Recommended motor | MN1315 KV100Listed under Recommended Combinations. |
| Recommended ESC | M248A14SListed under Recommended Combinations; inclusion in the supplied package is not established. |
| Motor weight | 1780 gPublished motor weight includes the cable. |
| Recommended propeller | VZ40 ×16.1Listed under Recommended Combinations; inclusion in the supplied package is not established. |
| Rated thrust per arm | 20–25 kgPublished per-arm rating; confirm the selected propulsion configuration. Test-bench data are for reference only. |
| Maximum thrust per arm | 50.1 kgPublished per-arm maximum; the specification table separately states 50 kg. Test-bench data are for reference only. |
| Operating temperature | −30°C to 55°C |
| Mean time between failures | ≥2000 hours |
| Test-table motor temperature | 97°CMotor surface temperature after operation at 80% throttle for 10 minutes, with ambient temperature 25°C. Based on T-MOTOR test benches; all data are for reference only. |
| Customization options | Custom coating, logo, temperature sensor, KV, hole pattern and cable lengthListed customization options; inclusion in the standard supplied motor is not established. |
| Model variant | MN1315 KV100Variant. |
| Intended platform | Heavy-lift UAVsDesign application. |
Request a quote for T-MOTOR MN1315 KV100 UAV motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
