ChinaDrone.Request a quote ↗
COMPONENT

XRotor 10A Mini

By HOBBYWING ↗

The HOBBYWING XRotor 10A Mini is a compact UAV electronic speed controller intended for applications including 250-class quadcopters. The 3S configuration supports 2-3S LiPo batteries, 10A continuous current and 15A peak current. Its 7g package includes twisted-pair signal wiring and Oneshot support.

Request a quote ↗
Model and configurationXRotor 10A Mini; specified configuration: XRotor 10A Mini 3S
Product number30901008
Continuous / peak current10A / 15A
Battery2-3S LiPo
BEC outputNone
Power wiresOne red 20AWG, 100mm wire and one black 20AWG, 100mm wire

Product overview

The HOBBYWING XRotor 10A Mini is an electronic speed controller for UAV propulsion, with 250-class quadcopters identified as its typical application. Its specified configuration is the XRotor 10A Mini 3S, product number 30901008. The controller combines UAV-specific control software with firmware optimized for disc-type motors and ultra-low internal-resistance MOSFETs. It supports throttle signals at refresh rates up to 621Hz and includes Oneshot throttle mode. Timing adjustment offers high and medium settings, while throttle range calibration and programming through an RC transmitter are supported.

The controller measures 44.2 × 12.2 × 9.2mm and weighs 7g, providing a narrow package for integration into racing frames. Its twisted-pair throttle signal wiring is designed to reduce crosstalk. Power connections comprise one red and one black 20AWG wire, each 100mm long, without a fitted power connector; the output connection uses female 2.0 gold bullet connectors, with no output wires specified. Electrical ratings are 10A continuous and 15A peak with a 2-3S LiPo battery. There is no BEC output, and DEO, light color adjustment and motor direction adjustment are unsupported.

Specifications

SpecificationValue & conditions
Model and configurationXRotor 10A Mini; specified configuration: XRotor 10A Mini 3S
Product number30901008
Continuous / peak current10A / 15A
Battery2-3S LiPo
BEC outputNone
Power wiresOne red 20AWG, 100mm wire and one black 20AWG, 100mm wire
Output wiresNone
Power connectorNo connector
Output connector2.0 gold bullet connector, female
Dimensions44.2 × 12.2 × 9.2mm
Weight7g
Throttle range calibrationSupported
Programming methodRC transmitter
DEONot supported
Oneshot throttle modeSupported
Timing adjustmentSupported; high or medium timing
Light color adjustmentNot supported
Motor direction adjustmentNot supported
Typical application250-class quadcopters
Maximum throttle signal refresh rateUp to 621Hz
Throttle signal wiringTwisted-pair throttle signal wires designed to reduce crosstalk
Motor firmware optimizationFirmware optimized for disc-type motors
Power switching architectureUltra-low internal-resistance MOSFETs
Control firmware purposeUAV-specific control firmware focused on fast throttle response
SOURCE WITH CHINADRONE

Request a quote for XRotor 10A Mini

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
MAD Components M40C30 PRO IPE 43KV brushless drone motor, shown at an angle
Motors & ESCs

M40C30 PRO IPE

By MAD Components

The MAD M40C30 PRO IPE is a heavy-duty brushless drone motor for VTOL, cargo and manned aerial propulsion. Designed for 47.5–54 inch carbon fiber propellers, it weighs 3460g and specifies 20–35 kgf rated thrust, with peak thrust up to 80 kgf. Three KV options support different propulsion configurations.

T-MOTOR V807 VTOL Propulsion Kit with motor, propeller and electronic speed controller
Motors & ESCs

T-MOTOR V807 VTOL Propulsion Kit

By T-MOTOR

The T-MOTOR V807 VTOL Propulsion Kit combines a V807 KV170 motor and FLAME 180A 12S V2.0 ESC for heavy-lift VTOL and industrial UAV integration. It provides 21 kg maximum thrust per motor, centrifugal fan cooling and 12S LiPo support. The recommended G28×9.2 glossy carbon fiber propeller is sold separately.

Scorpion IM-8008-100kv multirotor motor with black housing and gold base
Motors & ESCs

Scorpion IM-8008-100kv

By Scorpion

The Scorpion IM-8008-100kv is a multirotor UAV propulsion motor intended for 27" - 28" propellers and a recommended 12s supply. Its 36N40P architecture includes an 80.0mm stator, an 8mm steel shaft and dual NMB bearings. It weighs 279g including 20cm wire, with continuous power specified at 1065w.