Product overview
The GEPRC TAKER H743 MINI 32Bit 60A STACK combines a TAKER H743 MINI flight controller with a TAKER H60 MINI AM32 60A four-in-one ESC for UAV flight control and motor drive integration. Its controller uses an STM32H743VIH6 Cortex-M7 processor and ICM42688-P gyroscope, with external gyro clock support, high PSRR LDO filtering and an integrated LC filter. Onboard functions include a barometer, 16MB Blackbox storage and Betaflight OSD through an AT7456E device. The controller provides eight motor outputs and supports an X8 configuration.
Installation requires space for a 31×31mm flight controller and a 43×36mm ESC, both using a 20×20mm mounting pattern. The controller weighs 6.1g; the ESC weighs 17g with its aluminum heat sink. Integration connections include Type-C USB and a DJI plug-and-play Air Unit connector, while Bluetooth supports wireless tuning. Seven UARTs are specified, with UART8 reserved for Bluetooth. Both boards accept 3–8S LiPo input. The ESC supports DShot150/300/600, carries a 60A continuous rating and permits a 65A burst for five seconds.
The listed stack package supplies one flight controller, one ESC, a 50V 1000µF capacitor and cables for the DJI Air Unit, flight controller, GPS receiver connection and XT60 power input. The XT60 lead uses 12AWG wire and measures 55mm. Silicone dampers, stack screws and nuts accompany the electronics for assembly. STACK, FC and ESC are separate configuration options. This product is an electronics assembly for integration into an aircraft, rather than a complete flight platform or an airframe kit; the listed package consists of control electronics, wiring and mounting hardware.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | GEPRC TAKER H743 MINI 32Bit 60A STACK |
| Configuration options | STACK, FC, ESC |
| Flight controller model | TAKER H743 MINI Flight Controller |
| Processor | STM32H743VIH6 (Cortex-M7); specification designation: STM32H743 |
| Gyroscope | ICM42688-P (Gyro) |
| Blackbox storage | 16MB onboard |
| Dual independent BEC outputs | [email protected] + 5V@3A |
| On-screen display | Betaflight OSD AT7456E |
| Flight controller firmware target | GEPRC TAKER H743 MINI |
| Input voltage | 3–8S LiPoFlight controller and ESC. |
| Flight controller dimensions | 31×31mm |
| Mounting pattern | 20×20mmFlight controller and ESC. |
| UART count | 7UART8 reserved for Bluetooth. |
| Flight controller weight | 6.1g |
| ESC model | TAKER H60 MINI AM32 60A 4IN1 ESCAM32 pre-installed. |
| ESC continuous current | 60A |
| ESC burst current | 65A (5s)5s burst duration. |
| ESC protocol | DShot150/300/600 |
| ESC dimensions | 43×36mm |
| ESC weight | 17g (with aluminum heat sink)With aluminum heat sink. |
| ESC firmware | AM32 GEPRC 4IN1 F421 |
| Air Unit connector | DJI Plug & Play |
| Bluetooth | Wireless tuning supported |
| USB connector | Type-C |
| Barometer | Integrated |
| Filtering and spike protection | High PSRR LDO filtering; external gyro clock support |
| Power filtering and protection | Integrated LC filter; onboard TVS spike protection |
| Motor outputs | 8 motor outputs; supports X8 configuration |
| Included electronics and cables | 1× TAKER H743 MINI Flight Controller; 1× TAKER H60 MINI 32bit ESC; 1× 50V 1000µF capacitor; 1× DJI Air Unit cable (SH1.0-6P); 1× FC cable (SH1.0-8P); 1× FC to GPS RX cable (SH1.0-4P); 1× XT60 power cable (12AWG, 55mm)Listed stack configuration. |
| Included mounting hardware | 10× M3 silicone dampers; 5× M3*22 stack screws; 6× M3 nylon lock nuts; 5× M3 hex nutsListed stack configuration. |
Request a quote for GEPRC TAKER H743 MINI 32Bit 60A STACK
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
