Product overview
The BrotherHobby Avenger 6215 V5 Motor(CW) is a propulsion component for drone integration, with 155KV, 240KV and 270KV options. Its physical architecture combines a 15mm stator and 24N28P configuration with N52H arc magnets in the rotor. Both the base casing and bell cap use Al 7075, while the shaft uses SUS420. The motor weighs 365g. This is a motor component offering, with the CW designation identifying the particular version for procurement.
Mechanical integration centers on an M4 bolt pattern measuring 30*30mm and an M5 propeller adapter shaft thread. The bearings are specified as 16*8*5. Electrical integration uses 16# AWG wire with a stated length of 75cm, and the battery specification is 8-12S LiPo. These mounting, wiring and battery requirements define the stated integration interfaces; the three KV options remain separate choices within the same Avenger 6215 V5 Motor(CW) product identity.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | BrotherHobby Avenger 6215 V5 155KV/240KV/270KV Motor(CW) |
| KV options | 155KV/240KV/270KV |
| Base casing | Al 7075 |
| Stator | 15mm |
| Motor configuration | 24N28P |
| Propeller adapter shaft thread | M5 |
| Shaft material | SUS420 |
| Battery cell count | 8-12SLiPo battery. |
| Bolt pattern | M4(30*30mm) |
| Bearings | 16*8*5 |
| Rotor | N52H arc magnets |
| Weight | 365g |
| Wire gauge and length | 16# AWG; 75cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby Avenger 6215 V5 155KV/240KV/270KV Motor(CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
