Product overview
The BrotherHobby Avenger 2816 Motor is an FPV drone propulsion component offered in five winding options: 620KV, 750KV, 720KV, 810KV and 1050KV. Its physical architecture combines a 12N14P configuration with a stator made from 0.2mm Kawasaki silicon steel and a rotor using N52H arc magnets. Both the base casing and bell cap use Al 7075, while the hollow shaft is titanium alloy. Japanese NMB bearings measure 12x6x4 mm, completing the specified mechanical construction.
For installation, the motor has an M3 bolt pattern measuring 19X19mm and an M5 propeller adapter shaft thread. These dimensions define its mounting and propeller attachment interfaces for integration into a drone build. The electrical specification calls for a 4-6S LiPo battery and 18AWG wires measuring 25cm long. Its stated weight is 86.7g with 25cm SR wires, so that mass includes the specified wiring. Procurement concerns an individual motor component rather than a complete flight platform or an airframe kit.
Specifications
| Specification | Value & conditions |
|---|---|
| KV options | 620KV/750KV/720KV/810KV/1050KV |
| Base casing | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft | Titanium alloy hollow shaft |
| Battery cell count | 4-6SLiPo battery. |
| Bolt pattern | M3 (19X19mm) |
| Bearings | Japanese NMB 12x6x4 mm |
| Rotor magnets | N52H arc magnets |
| Weight | 86.7gWith 25cm SR wires. |
| Wire gauge and length | 18AWG, 25cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby Avenger 2816 Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
