ChinaDrone.Request a quote ↗
COMPONENT

Boslipo S8 Version 1760mAh 160C 6S FPV Battery

By Shenzhen BBR New Energy Technology Inc ↗

The Boslipo S8 Version 1760mAh 160C 6S FPV Battery is an FPV power pack configured as 6S1P at 22.2V with an XT60 plug. Its 1760mAh capacity and 160C rating accompany specific charging, discharge and storage requirements, including a 4.2V-per-cell charging ceiling.

Get a free sourcing quote for Boslipo S8 Version 1760mAh 160C 6S FPV Battery

Get a free quote

ProductBoslipo S8 Version 1760mAh 160C 6S FPV Battery
Capacity1760mAh
C rating160C
Cell configuration6S1P
Pack voltage22.2V
ConnectorXT60 plug

Product overview

The Boslipo S8 Version 1760mAh 160C 6S FPV Battery is a battery pack for FPV applications. Its supplied configuration combines 1760mAh capacity, a 160C rating, a 6S1P cell arrangement and 22.2V pack voltage with an XT60 plug. The arrangement comprises six cells in series and one parallel string. These electrical and connector specifications define its integration requirements: the pack provides power through an XT60 connection, with a nominal cell voltage of 3.7V and a maximum charging voltage of 4.2V per cell.

Battery handling requires supervised charging and at least five minutes of rest after discharge before recharging. No-load voltage should remain above 3.5V per cell, and frequent high-current charging should be avoided unless necessary. For long-term storage, maintain 3.85V per cell at 5-28°C; avoid high-temperature environments, storage at 4.2V per cell and extended storage below 3.7V per cell. Complete a charge-discharge cycle at least monthly, charge shortly before intended use, and discharge to 3.6V per cell for transport on public conveyances.

Specifications

SpecificationValue & conditions
ProductBoslipo S8 Version 1760mAh 160C 6S FPV Battery
Capacity1760mAh
C rating160C
Cell configuration6S1P
Pack voltage22.2V
ConnectorXT60 plug
Nominal cell voltage3.7V per cell
Maximum charge voltageMust not exceed 4.2V per cellDuring charging.
Charging supervisionNever leave the battery unattended.During charging.
Full-charge storage restrictionDo not store at 4.2V per cell.During storage.
Heat exposure restrictionAvoid high-temperature environments.During storage or when leaving the battery.
Rest intervalAt least 5 minutesAfter discharge, before charging.
Discharge voltage limitGreater than 3.5V per cell; avoid deep discharge.No-load measurement.
Charging timingCharge only when use is intended shortly afterward.When preparing to use the battery shortly afterward.
Fast charging restrictionAvoid frequent high-current charging unless necessary.During high-current charging.
Maintenance cycleOne complete charge-discharge cycle at least once per monthFor cell health maintenance.
Low-voltage storage restrictionNever store below 3.7V per cell for extended periods.During extended storage.
Storage voltage and temperature3.85V per cell at 5-28°CDuring long-term storage.
Transport voltageDischarge to 3.6V per cell.When transporting the battery on public conveyances.

Ask for the Boslipo S8 Version 1760mAh 160C 6S FPV Battery price ↑

Related guides

ZeroOne OneUBEC power supply module with red and black leads and output connectors
Component

ZeroOne OneUBEC Power Supply

ZeroOne

The ZeroOne OneUBEC from ZeroOne Flight (Nanjing) Technology Co., Ltd. is a high-voltage, high-current, ultra-low-loss step-down regulated power supply. It accepts 3–18S input, offers four output-voltage settings across 5.2–8.4 V, supports XT30 and Dupont interfaces, and provides 20 A continuous or 36 A momentary current.

EV-PEAK A9 battery charger with touch screen and blue-and-silver housing
Component

EV-PEAK A9 Battery Charger

EV-PEAK

The EV-PEAK A9 is a compact touchscreen battery charger for UAV, FPV and other radio-controlled applications. It supports five battery chemistries, offers up to 1350W charging power and 25A charging current, and combines saved charging settings with battery-status monitoring in a 1520g unit.

GEPRC PDB Hexacopter Power Distribution Board with gold solder pads and a white connector
Component

GEPRC PDB Hexacopter Power Distribution Board

By GEPRC

The GEPRC PDB Hexacopter Power Distribution Board is a six-channel power distribution component for hexacopter integration. It accepts 3–8S LiPo input, supports an on-board current meter, and measures 53x53mm. The package includes capacitors, XT90+ connectors with wire, a flight controller connection cable and damping balls.

KEEP EXPLORING

Similar products

Browse all products ↗
Mugin 3L Fuel Tank with a white body, circular top connection plate and three yellow hoses
Batteries & charging

Mugin 3L Fuel Tank

Mugin

The MUGINUAV Mugin 3L Fuel Tank is a multipurpose fuel-system component for UAVs, model aircraft and other fuel-powered equipment. It combines a low-profile, blow-molded HDPE body with side mounting projections and grouped top connections. Its nominal capacity is 3 L, and installation requires clearance for hoses, the connection plate and servicing access.

Batteries & charging

EV-PEAK UD2-100 Battery Charger

EV-PEAK

The EV-PEAK UD2-100 is a dual-channel intelligent charger for 20S–24S UAV batteries, focused on 24S high-voltage systems. It combines automatic charging, dedicated battery interfaces and configurable communication options in a fan-cooled metal housing. Maximum output reaches 3000W at 220V input, with charging current governed by channel use, battery conditions and available power.