GEPRC Storm2.0 8S 1530mAh 160C LiPo Battery
By GEPRCThe GEPRC Storm2.0 8S 1530mAh 160C is a LiPo battery for quadcopters, RC toys and boats. Supplied as one pack, it combines an 8S1P configuration, 29.6V nominal voltage and 45.29Wh energy with an XT60 female discharge connector, an XH2.54 9-pin balance connector and a weight of 280g.
Explore product ↗industryGEPRC Super Buzzer
By GEPRCThe GEPRC Super Buzzer is a compact FPV aircraft locator with a built-in battery, LED and 100-decibel alarm. It connects to a Betaflight flight controller's buzzer signal line and automatically sounds and flashes after power-off, helping indicate a missing aircraft's approximate position by sound.
Explore product ↗industryGEPRC T-Cube18 1S Analog Quadcopter
By GEPRCThe GEPRC T-Cube18 1S Analog Quadcopter is a compact FPV flight platform for indoor and outdoor use. It combines an 87mm carbon-fiber frame, integrated flight controller and ELRS receiver, analog camera and video transmitter, and 1002 motors. Recommended power is LiHV 1S 530mAh, with 3–5 minutes of low-speed cruise flight.
Explore product ↗industryGEPRC T-Cube18 2S Analog Quadcopter
By GEPRCThe GEPRC T-Cube18 2S Analog Quadcopter is a compact FPV flight platform for indoor and outdoor flying, with an 87mm wheelbase, carbon fiber plate and integrated ELRS receiver. It uses analog video equipment and a recommended LiHV 2S 500mAh battery. Flight time is 3–5 minutes during low-speed cruise; actual times vary with flying method.
Explore product ↗industryGEPRC T-Cube18 2S WTFPV Kit Quadcopter with Built-in ELRS2.4G
By GEPRCThe GEPRC T-Cube18 2S WTFPV Kit is an 87mm micro quadcopter platform for custom Tinywhoop builds. It includes flight electronics, motors, propellers and a built-in ELRS2.4G receiver, with a 1.5mm carbon fiber plate.
Explore product ↗industryGEPRC T-Cube18 HD O4 Quadcopter
By GEPRCThe GEPRC T-Cube18 HD O4 Quadcopter is a compact indoor and outdoor FPV flight platform with an 87mm wheelbase, a carbon fiber plate and DJI O4 video hardware. It uses a recommended LiHV 2S 380mAh battery. Flight time is 3–5 minutes during low-speed cruising, with actual duration varying by flying method.
Explore product ↗industryGEPRC T-Cube18 O4 WTFPV Quadcopter with Built-in ELRS2.4G
By GEPRCThe GEPRC T-Cube18 O4 WTFPV is a compact quadcopter for indoor and outdoor beginner practice, combining an 87mm wheelbase, carbon fiber plate, integrated flight electronics and built-in ELRS2.4G reception. A LiHV 2S 380mAh battery is recommended. Flight time is 3–5 minutes based on low-speed cruising; actual times may vary with different flying methods.
Explore product ↗industryT3x3x3 Propeller Red/Black
By GEPRCThe GEPRC T3x3x3 Propeller Red/Black is a polycarbonate, three-blade propeller set for 3-inch drones. It includes two clockwise and two counterclockwise HQProp T3X3X3 propellers, with red and black options. Each propeller has a specified pitch of 3 and weight of 1.48g; adaptor rings are not included.
Explore product ↗industryGEPRC TAKER F405 20A ELRS2.4G 2~4S AIO
By GEPRCThe GEPRC TAKER F405 20A ELRS2.4G 2–4S AIO combines flight control, ESC functionality and an ELRS 2.4GHz receiver for 1.6–2.2-inch micro FPV builds. Its 7g board offers five full UARTs, a bottom-mounted HD VTX connector and 2–4S LiPo input, with 20A continuous current and a 25A peak for 10 seconds.
Explore product ↗industryGEPRC TAKER F405 BL32 70A STACK
By GEPRCThe GEPRC TAKER F405 BL32 70A STACK is a UAV electronics assembly pairing an STM32F405 flight controller with a 70A 4-in-1 ESC. Designed for direct DJI Air Unit integration, it supports 3-6S LiPo power and includes connection cables, a capacitor and mounting hardware.
Explore product ↗industryGEPRC TAKER F405 BLS 100A 8S STACK
By GEPRCThe GEPRC TAKER F405 BLS 100A 8S STACK is a UAV electronics assembly pairing an F405 flight controller with a 100A four-in-one ESC. It supports 3-8S LiPo input, direct DJI Air Unit connection and dual BEC outputs. The stack configuration includes wiring and mounting hardware, with separate FC and ESC options also listed.
Explore product ↗industryGEPRC TAKER F405 BLS 50A Stack
By GEPRCThe GEPRC TAKER F405 BLS 50A Stack is a UAV electronics assembly pairing an F405 flight controller with a four-in-one 50A ESC. Designed for direct DJI Air Unit connection, it includes dual independent BEC outputs, onboard logging and mounting accessories. Both boards support 3-6S LiPo input, with different board footprints sharing a 30.5×30.5mm mounting pattern.
Explore product ↗